125mm In-Line Centrifugal SDX125 - Vent Axia
-
DETAILS
VENT-AXIA EUROFLOW SDX125 125MM INLINE CENTRIFUGAL FAN
Features & Benefits:
- Motor Insulation Class B, protected to IP44
- Operating Temperatures from -25°C up to +60°C
- All units suitable for speed control
- Quality Assurance to BS EN ISO 9001:1994
- Performance tested to BS848 Part 1 1980
- 2 Year Warranty
- Latest model direct from manufacturer.
Summary:
The SDX Euroflow in-line centrifugal duct fans are designed around an efficient backward curved centrifugal impeller and external rotor motor, to ensure a compact design, high performance and low sound levels.
The in-line fan shall be constructed from steel and incorporate an aerodynamically designed airflow guide vane, ensuring maximum performance from the unit. All models are to have 25 or 30mm inlet and discharge spigots, for ease of installation and shall come complete with mounting feet for horizontal or vertical mounting.
The SDX range is available in twelve models, sizes 100, 125, 150, 200, 250 & 315mm diameter, with sizes 150 to 315 available as a standard or high performance in-line centrifugal duct fan. The range shall provide a performance from 0.01³/s to 0.435m³/s with a maximum pressure development of up to 500 Pa.
The SDX range is suitable for the extract of clean air only. It is not suitable for extracting or transporting grinding dust, soot, explosive or other aggressive gases etc.
Impellers
The impellers shall be aerodynamically designed centrifugal backward curved type, manufactured from steel or polyamide. The motor and impeller shall be factory matched, statically and dynamically balanced in two planes to ISO 1940, Grade G 6.3.
Motors
All sizes from 100 to 315 shall be protected to IP44 in accordance with BS EN 60529:1992. With motor insulation Class B, suitable for operating temperatures from -15°C to +40°C and atmospheres up to 95% RH. The range shall incorporate maintenance free external rotor motors, fitted with sealed for life ball bearings, ideally suited for speed control by electronic or voltage reduction. The motors shall be wound to suit a 230V/1PH/50Hz electrical supply, with all motors permanent capacitor type to optimise efficiency. HOT SPOT protection by means of a thermal contact switch incorporated within the windings shall be provided to prevent motor damage due to overloading/overheating.
Terminal Box
An IP44 terminal box shall be supplied with all models with 20mm entry.
Performance
The fan performance shall be in accordance with tests to BS848 Part 1 1980, with the fan sound levels measured in a reverberant chamber in accordance with BS848 Part 2 1985.
Quality Assurance
Design and manufacture shall be in accordance with the standard for quality management systems BS EN ISO 9001:1994.
Accessories
A full range of accessories are available with the Euroflow in-line centrifugal duct fans such as:
• Electronic Speed Controllers
• Auto Transformer Speed Controllers
• D.O.L. Starters
• Pre & Secondary Filter Cassettes
• Electric Heater Batteries
• In-Line Attenuators
• Backdraught Shutters
• Fast Clamps
• Flexible Ducting
• Wall Terminals
• Roof Terminals -
FEATURES
Features
- 125mm Centrifugal Fan
- Operating Temperatures from -25°C up to +60°C
- All units suitable for speed control
- Quality Assurance to BS EN ISO 9001:1994
- Performance tested to BS848 Part 1 1980
-
TECHNICAL
Technical Specifications
Product Category In-Line Fans Round System (mm) 125 Product Type In-Line Fans Product Group Ventilation Fan Product Variety Standard Quick Search: QS17875 -
REVIEWS
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
-
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.