Nuaire Drimaster Eco Link Hall Control Positive Input Ventilation Unit

Is the remote control hard wired and does it give the facility for variable flow rates. What are the noise levels as my application is for our main bedroom i.e. will I hear it?

The product description for this model straws: "with optional sensors and controllers" but i cant see anywhere what these are. The picture of optional controllers i assume cost extra. Can you clarify please? I assume that for an extra £40 the "link" model has the capacity to connect to the optional products which can be purchased separately. Is that correct? I apologise that i didn't find the product details clear. Kind regards, Mark

Hi i have a 2 bedroom 1 level cottage and one of the bedrooms seems to get mould on walls , the humidity level sometimes goes upto 70% but letting fresh air in drops below 60% will this unit solve if fitted in lounge as bedrooms are on either side ? Also how oftern do you need to change the filters as they seem a little costly. Or would it be best to use another prouduct.Thanks regards steve.

Hi, I have a couple of questions about the product: 1: Can it be wired into a lighting ring (I will be using an electrician, but just want to know in advance if it is suitable for a wiring ring or if it needs connecting to a mains ring) 2: Is there a maximum length of ducting that can be used? 3: Does this come with any sensors / controls or do you buy all the sensors / controls separately? Thanks Tim

I live in a single story bungalow, its a large L shaped property. Could 2 units be installed (at either end of property) but still be linked to 1 control unit?

I know you say to use DRIMASTER ECO HEAT POSITIVE INPUT VENTILATION UNIT WITH INTEGRAL 400W HEATER on high ceiling but what do you class as a high ceiling please. Due to me not being able to fine a measurement

Can a remote controller be added at a later date (ie-boost control) if i feel the unit needs to be on a higher setting?

Hello. Can this invoice be change to Zimon Building LTD, now it is invoiced to Jan Zimon (director). Regards,

Hi, looks like a great product and a few questions? Our ceiling height on the landing is about 3.5m high. Presume we should opt for the drimaster eco-link-hc over the NUADRI-ECO-HEAT-HC as our landing height and also the fact we have a radiator on the landing and hall would mean the hot air would rise? I can't find anything to do with how much power this takes to run and if it's more efficient than the heat option? Can't understand how the humidity sensor works - can we set it to turn on the fans if the house rises above 55%? Cheers,

Hi Ian, thanks loads for the heat vs non heat answer. Just a quick question about what power this needs? Does it need a single/double power plug socket or a single/double fuse spur with an on/off to run?

Hi, great bit of kit but think we need to make this more central and higher with regards to the flexible hose, can you let me know what part number to buy instead of the standard 2m, ideally looking at 3m - 4m if possible. Cheers, Pom

I live in a 3 bed bungalow, large lounge , long hall way . medium size Kitchen, we get a lot of condensation. which product would you recommend. ???

Hi I have a 3 bedroom, 2 storey, detached house (circa 1950) with double-glazed windows, insulated loft and insulated cavity walls. I have had quite bad condensation (mainly on windows) and some mould problems (mainly behind furniture, in some cupboards, etc) which I think may be related to high humidity / lack of ventilation (even though I have humidistat fans in the bathroom and kitchen and open windows, etc). These are particularly bad in the colder months. Please confirm if this is likely to be the cause and if installing a PIV unit (would a Nauire unit be the most appropriate?) should solve these problems. The height of the ceiling above the stairwell (on the landing) is 2.4m. My main questions are which unit would be most suitable please? Would I need the 'heater' version (I've read some reviews saying the standard units can cause a cold draught in the winter - is this correct please?) Also, looking at the various 'options', would you recommend the associated 'boost switch' and/or the humidity sensor unit. Regarding the location of the unit, please note that part of the landing ceiling has a structural joist (covered) projecting down by 160mm (this is to one side of the centre), a 'hanging' ceiling light and a smoke detector. I can send a photograph and/or dimensions if necessary. Many thanks for your help. A quick reply would be appreciated.

We are looking at purchasing this.. so we wnt up into the loft. I think you oculd grow tomatoes up there, with at least 12 inches at least of insulation right to the edge of the join between roof and insulation which is packed into the corner. Does not help having the boiler in loft too! So I was thinking to put some roof tiles with vents. Depends again on how many we would need. Any ideas on how to calculate that based on fro example loft area? Also airflow performance 10 and 60 is that litres per minute airflow? thank in advance