Vent Axia Lo-Carbon Tempra SELV HTP Single Room HRV
-
DETAILS
Vent Axia Lo-Carbon Tempra SELV HTP Single Room HRV
The Vent-Axia Lo-Carbon Tempra through the wall heat recovery units are suitable for fitting through a 102mm (4”) circular hole and are designed for use in bathrooms, toilets and utility areas. Under the new Building Regulations Document F continuous running products, such as the Lo Carbon Tempra only need to move the amount of air as laid down in table 5.1a of Document F. The Vent-Axia Lo-Carbon Tempra is available with pullcord control, timer control or humidistat, timer and pullcord. All models are also available in SELV (Safety Extra Low Voltage).
Typical Installation: The Lo-Carbon Tempra unit is designed for installation in a 102mm (4”) core drilled hole. All installation can be carried out from inside the building. The units are suitable for external walls up to 318mm thick.
Easy installation and maintenance
With simple construction Tempra is both easy to fit in the same location as an existing 100mm diameter fan, and with easy access to the heat exchanger for maintenance.
-
TECHNICAL
Technical Specifications
Heat Recovery Efficiency (Up to - %) 78 SELV Yes Product Type Misc Product Group Misc IP Rating IPX4 Power Min (Watts) 3.2 Power Max (Watts) 26.6 Decibel Rating (dB) - Low 20 Decibel Rating (dB) - Max 36 Manufacturer Product Code 444370 Airflow Performance (l/s) - Low 6 Airflow Performance (l/s) - Med 9 Airflow Performance (l/s) - High 15 Airflow Performance (m³/h) - Low 21.6 Airflow Performance (m³/h) - Med 32.4 Airflow Performance (m³/h) - High 54 Quick Search: QS12289 -
REVIEWS
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1service intervalHi, what is the recomended service interval for these. Presumably it just involves cleaning the heat exchanger?
Question by David Farningham, 24-11-2022Good morning David. Yes pretty much.
If you look at page 9 of the installation instructions, it suggest cleaning the heat exchanger.Remove Retaining Plate, Carefully slide out the Heat Exchanger Fig 25 & 26 and wash in warmwater using a mild detergent, dry thoroughly and re assemble in reverse order to above.Kind regards,MarcReplied by i-sells, 24-11-2022 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.