Rytons 125mm Aircore Controllable - Push-Pull Louvre Lookryt Panel
-
DETAILS
RYTAC5HMP – RYTONS 125MM AIRCORE CONTROLLABLE LOOKRYT PANEL
Product Summary:
- Adjustable internal panel for background ventilation.
- Manually adjusted allowing full control over the amount of ventilation let into the room.
- Unique design disperses air evenly to reduce draughts.
- Endplate may be painted or wallpapered to match room décor.
- Connects to Rytons 125mm AirCore® Tubes (RYTAC10TUBE and RYTAC7TUBE).
- Fixing screws available (code RYTAC-SCREWPACK).
- European Design Registration No. 002010108. UK Design Registration Nos. 4018847 and 4018848.
- Patent pending.
- Free Area: 7000mm² (70cm²) per unit.
- Colour: Magnolia (Can be decorated)
- Composition: High impact styrene.
Installation:
- Do not fit the two parts of the LookRyt® panel together yet!
- Push-fit the spigot into Rytons AirCore® tube ensuring the groove in the spigot is aligned with the lug inside the tube.
- Screw the backplate to the wall through the corner fixing points.
- When happy with the positioning of the backplate, push-fit the LookRyt® faceplate on to the finish.
- The grille may then be opened and closed using a push/pull action.
- The LookRyt® faceplate may be painted or wallpapered to match the room décor.
-
FEATURES
Features
- SIZE: 172mm L x 172mm H with a 122mm Dia. male spigot.
- FREE AREA: 7000mm² (70cm²) per unit.
- Unique design disperses air evenly to reduce draughts.
- Manually adjusted allowing full control over the amount of ventilation let into the room.
- Colour: Magnolia (Can be decorated) Adjustable internal panel for background ventilation.
-
TECHNICAL
Technical Specifications
Replaces Product Code hm51f Product Category Passive Vent Product Type Panel Product Group Passive Ventilators Length (mm) 172 Width (mm) 172 Face Size (mm) 172 Free Area (mm²) 7000 Colour Magnolia Colour - External Magnolia Material High Impact Styrene. Weight (Kg) 0.113 Packaged Weight (Kg) 0.113 Manufacturer Product Code AC5HMP Quick Search: QS38969 -
REVIEWS
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1Use in an MVHR systemHi, I am really struggling to find a non-circular adjustable valve for a wall outlet for my MVHR system I am putting in. Would this product be ok to use and does it fully close?
Question by Iain, 08-11-2019Hello Iain
Thank you for your question. Please could advise what size ducting you have and I maybe able to find you an outside grille.Kind RegardsAnitaReplied by i-sells, 08-11-2019#2Fitting to existing tubeI have a draughty vent in my room installed by British Gas after we had cavity wall insulation. Will this fit to the existing tube? Thanks
Question by Michael Coombes, 20-09-2020Hello Michael
Thank you for your question. If you already have an existing Rytons tube then yes this will fit if you just have a 125mm pipe then no as this item will Push-fit into a Rytons AirCore tube ensuring that the groove in the spigot is aligned with the lug inside the tube. If I can help any further please do not hesitate to contact meKind RegardsAnitaReplied by i-sells, 21-09-2020#3refitting existing ventour passive vent has the dimension 185 x 110mm. A neighbour replaced the old vent with the Lookryt panel but used not plastic tubing inside the wall, but some kind of foam tubing to fit it into our vent brick. The outer grill can't be changed, just the inside. Do you have some suggestions what we could use to fit the panel to our vent and insulate/reduce noise level?
Question by Kerstin Hasenpusch-Theil, 11-03-2021Good morning Kerstin. I'm not 100% sure what components you will need. I think you may need the air core tube and an external grill. I have forwarded this to Rytons technical who should give me a response on Monday. I will email you when I have a response.
Kindest regards,Marc.Replied by i-sells, 13-03-2021#4Removing the faceplateHi, These were installed in my home by a contractor, I want to remove the faceplate to paint - can they be removed without breaking? Thanks
Question by Keith Richardson, 16-01-2024Good morning Keith. In theory, yes they can, but you do have to be careful.
They aren't designed to be removed once fixed into place, so if I'm honest, most of them do break. We do have stock currently, though.Kind regards,MarcReplied by i-sells, 17-01-2024 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.