Kair Circular Vent 100mm - 4 inch White with Fly Screen - Round Wall Grille
-
DETAILS
KAIR SYSTEM 100 ROUND GRILLE WITH FLYSCREEN
Product Details:
Round wall outlet ventilation grille for use with extraction or input ventilation systems, cooker hoods, tumble dryers, or hydroponics.Flyscreen will help prevent insects from entering the property via your duct run.
Fits inside Kair 100mm Round Pipe (Part: "DUCVKC250") or 102mm flexible hose (part: "DUCP0092/102/35").
Easy to install ';clip-in'; design. Built to last in the UK using high-quality Polystyrene/Polypropylene plastic Material.
- Made in the UK.
- Max / Min Temperature: +60c / -15c.
- Compact dimensions.
- Easy to install and durable, just push-fit duct and fittings together.
- For permanent fixings, seal joints with silicone sealant or tape.
- Airflow performance independently tested by BSRIA or BRE.
- Free Air = 4,007 mm2 -
- Static Pressure Drop in Pascals: 15 l/s = 22.50 Pa - 30 l/s = 75.80 Pa - 60 l/s = 291.90 Pa.
Perfectly suited for ducting your Bathroom or Kitchen extractor fan, Hydroponics, In-Line Extract Fans, Tumble Dryer, or Cooker Hood.
This item can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input ventilation, air conditioning, HVAC, and Heat Recovery systems.
Kair SYS-100 plastic rigid ducting is perfect for DIY and Trade use and provides superior airflow performance and durability versus flexible duct.
Suitable to use in compliance with Part F Building Regulations.
Genuine Kair Product & covered by the Kair 100% Satisfaction Guarantee. Compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles.
Click here to view the full range of Kair 100mm Round / 110mm x 54mm Rectangular Ducting Products.
-
FEATURES
Features
- Kair 100mm round plastic air ventilation outlet/inlet with flyscreen.
- Easy to install and durable, just push-fit duct and fittings together.
- Max / Min Temperature: +60c / -15c.
- Easy to install 'clip in' design.
-
TECHNICAL
Technical Specifications
Product Category Grilles Round System (mm) 100 Product Type Wall Vent Product Group Plastic Ducting Length (mm) 128 Width (mm) 38 Height (mm) 128 Spigot size (mm) 34 x 96 x 96 Colour White Material Polystyrene Weight (Kg) 0.044 Packaged Weight (Kg) 0.044 Packaged Length (mm) 128 Packaged Width (mm) 38 Packaged Height (mm) 128 Temp Max (°C) 60 Temp Min (°C) -15 Barcode 5060272541088 Manrose (similar) 41020 Polypipe / Domus (similar) 4804 Pressure Loss (Pa) 15 l/s 22.5 Pressure Loss (Pa) 30 l/s 75.8 Pressure Loss (Pa) 60 l/s 291.9 Quick Search: QS209 -
REVIEWS
-
Garrett FinnertyDate Added: Monday 28 June, 2021
Good product as per my expectations -
Gwen ScottDate Added: Thursday 20 May, 2021
Great customer service. Fast delivery. Superior product. Easy to fit. -
James DowlingDate Added: Tuesday 18 August, 2020
From telephone advice and order to delivery this was all very swift. The product suited requirements perfectly and reasonably priced given so called trade merchants and retail centres. -
Michael HembryDate Added: Tuesday 31 March, 2020
Fly screen could be better fixed / located -
Steve McnairDate Added: Wednesday 28 March, 2018
Great product and just as described at a good price. Just wish you didn't use UK Mail to deliver your items. They are useless, especially there on line systems. Nearly had the item sent back to you becase they didn't action my requests. -
George PurserDate Added: Saturday 01 April, 2017
Excellent good service/product and delivery -
Hugh RichmondDate Added: Friday 02 October, 2015
tick all boxes. good price
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#2flexible bends (i.e not 45 degrees)I'm fitting an extraction system for my bathroom based on the Manrose inline fan. I am using 100 mm round pipework but need to switch to the rectangular 110 flat channel to follow the roofline down across the plate to the back of the soffit board where i hope to convert back to 100mm round to exit the underside of the soffit through the Kair 100 mm round grille with fly screen. the pitch of my roof is considerably less than 45 degrees so fixed 45 bends at either end of the flat channel will not get me at the correct angle to connect. can you get flexible bends to give me the angles i need or is the only solution to use short pieces of flexible ducting to connect ?
Question by Steve Woolridge, 23-08-2018Hello Steve
Thank you for your question. We do a flexible bend which comes in rectangular the product code for this item is QS4251. If i can help any further please do not hesitate to contact meKind RegardsAnitaReplied by i-sells, 23-08-2018#4Size of productI note that the inside push-fits into a 100mm duct, but what is the diameter of the outside? Has it 2 screwholes for fixing to the external wall?
Question by Richard Clarke, 07-12-2020Hello Richard
Thank you for your question. The diameter for the outside from top to bottom is 128mm and from the from to the back is 39mm, and yes it has two holes to fix to the wallKind RegardsAnitaReplied by i-sells, 07-12-2020 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.