Rectangular Ducting 180mm X 90mm - Horizontal Bend 90 Degree
-
DETAILS
KAIR SYSTEM 150 RECTANGULAR - 180MM x 95MM - 90 DEGREE HORIZONTAL BEND
Product Details:
This horizontal 90-degree elbow bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives.
Both sides are female sockets. The ends will fit over Kair System 150 180mm x 95mm flat ducting pipe (Part: "DUCVKC651").
Kair System 150 (SYS-150) 180mm x 95mm rectangular ducting is designed for use with medium to high capacity extraction systems and cooker hoods. It is perfect for flush fitting against ceilings and walls and can be concealed above wall units or inside ceiling voids. Made in the UK using strong high-quality white polystyrene/polypropylene material for greater durability.- Made in the UK using strong high-quality white polystyrene/polypropylene material.
- Max / Min Temperature: +60c / -15c.
- Easy to install and durable, just push-fit duct and fittings together.
- For permanent fixings, seal joints with silicone sealant, solvent cement, or tape.
- Kair plastic rigid duct provides superior airflow performance and durability versus flexible duct.
- Suitable to use in compliance with Part F Building Regulations.
- Airflow performance independently tested by BSRIA or BRE.
- Static Pressure Drop in Pascals: 15 l/s = 0.68 Pa - 30 l/s = 2.52 Pa - 60 l/s = 9.32 Pa.
Installation Tips:
- Kair plastic ducting pipe is lightweight & easy to install. You simply push-fit the duct pipe and fittings together. For permanent fixings, you can seal the joints with a method of your choice (Popular options include silicone sealant, solvent cement, or tape).
- Rectangular plastic ducting can be carefully cut to the required size using a hacksaw. Offcuts are always useful to keep to hand for joining two female fittings together.
- If your duct run passes through a particularly cold area, we would recommend considering using our pre-insulated ducting to avoid condensation building up within your ductwork. Click here to view our range of pre-insulated plastic ducting.
Alternative Products:
Looking for Compatible Fittings?
Compatible with the extensive Kair System 150 range of pipes, fittings, outlets, and grilles.
Click here to view the full range of Kair 150mm Round / 180mm x 95mm Rectangular Ducting Products.
Common Applications:
The Kair range of plastic ducting is commonly used for the following applications:
- Bathroom Extractor Fan Ducting
- Kitchen Extractor Fan Ducting
- Cooker Hood Ducting
- Heat Recovery Unit Ducting
- Air Conditioning Ducting
- HVAC Ducting
- Tumble Dryer Ducting
- Hydroponics Ventilation Ducting
- Whole House Ventilation Ducting
- Positive Input Ventilation System Ducting
-
FEATURES
Features
- Horizontal 90 degree ducting bend
- Offers superior durability and airflow performance vs using flexible hose
- Easy to install and durable, just push-fit duct and fittings together
- Airflow performance independently tested by BSRIA or BRE
- Max / Min Temperature: +60c / -15c
-
TECHNICAL
Technical Specifications
Product Category Bends Flat System (mm) 180x90 Product Type Bend Product Group Plastic Ducting Product Variety 90 Degree Horizontal Length (mm) 225 Width (mm) 225 Height (mm) 100 Socket size (mm) 180 Colour White Material Polypropylene Weight (Kg) 0.315 Packaged Weight (Kg) 0.302 Packaged Length (mm) 225 Packaged Width (mm) 100 Packaged Height (mm) 225 Temp Max (°C) 60 Temp Min (°C) -15 Barcode 5060272542184 Pressure Loss (Pa) 15 l/s 0.68 Pressure Loss (Pa) 30 l/s 2.52 Pressure Loss (Pa) 60 l/s 9.32 Quick Search: QS374 -
REVIEWS
-
Peter R MuffDate Added: Tuesday 09 August, 2016
Does the job well doesn't need 20 characters -
Ray WhalleyDate Added: Tuesday 03 November, 2015
Part of a cooker hood exhaust system sized for 150mm diameter ducting at the fan outlet this component was used 2 times to create a dog leg in the run for correct alignment with the external wall outlet. Connection to the straight duct sections was easy due to the loose fit tolerance, white Duck Brand USA tape the linen reinforced type 50mm wide, was used to secure and seal the joins. A surprisingly rigid duct run was created that I am happy with. -
Jane EthertonDate Added: Wednesday 05 September, 2012
Needed this part to complete a long run of ducting for a Wickes kitchen sold with an Electrolux extractor fan & hood and an Electrolux ducting kit. Electrolux only sells the full kits (for £91!) and the dimensions of the ducting are much larger than standard. After searching at Wickes, B&Q, HomeBase and several electrical and plumbing trade outlets, i-sells.co.uk came to the rescue! I got what I needed quickly, at a good price and with good customer service. Thank you, i-sells.co.uk! P.S. They have the best chime on the bell at their collection desk ;-)
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
-
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.