200DIA 600 Length 50mm Ins Silencer - Attenuator
-
DETAILS
Circular attenuators offer excellent sound-absorbing properties and are suitable for continuous operation at temperatures up to 100°C and intermittently up to 120°C.
Testing
Our Tecsound Attenuators are tested in accordance with ISO 7235 “Acoustics – Measurement procedures for ducted silencers – insertion loss, flow loss and total pressure loss.”
Construction
Casing: Galvanised mild steel with circular duct connection spigots fitted with the unique Safe-gasket for a leak-free connection.
Inner Lining: Perforated galvanised mild steel.
Sound Absorbing Material: Mineral wool faced with a polyester cloth to prevent migration of mineral wool fibres into the airstream. -
FEATURES
Features
- Tecsound circular spigoted attenuators offer excellent sound absorbing properties.
- Suitable for temperatures up to 200?C and a maximum pressure of 1500 pascals.
- 50mm insulation as standard.
- Versions with extra insulation and or baffles are also available.
- This item is made to order. Please call us to confirm lead time - 020 8463 9696
-
TECHNICAL
Technical Specifications
Product Category Silencers Round System (mm) 200 Product Type Silencer Product Group Metal Ducting Length (mm) 600 Economy Delivery Not Eligible Next Day Delivery Not Eligible Manufacturer Product Code 256109 Quick Search: QS10326 -
REVIEWS
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1SuitabilityIs this silencer suitable for use on tumble dryer metal ducting? Dryer is gas powered. Thanksd.
Question by Nick, 15-08-2018Hello Nick
The short answer is yes this would be suitable for tumble dryer ducting.Replied by i-sells, 15-08-2018#2Commercial dryer noise reduction?Hello, would this reduce a loud humming noise coming from two old commercial (Care Home) 200mm tumble dryer vents coming through a brick wall? The noise isn't too bad at source but we think it is accentuated because it vents into a 5 feet wide passageway (no roof) and bounces around off the wall opposite? The noise also pulses sometimes when both vents are operating. We have photos if that would help? Also is it DIY fit or does it need professionally fitting? Many thanks.
Question by L Whittington, 07-08-2021Good morning, and thank you for your question. We would always recommend getting a professional in to install, but if your quite a handy DIYer, then you may be ok. These inline attenuators are designed to reduce noise travelling down the duct run, so if the noise is being transmitted at source and travelling a long a duct into another room, where the noise is being heard, then it is possible, the attenuator will reduce that noise..
I hope that makes sense.Kindest regards,Marc.Replied by i-sells, 09-08-2021 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.