Top » Ventilation - Passive
Rytons 125mm Baffled Cowled Aircore Controllable - Push-Pull Louvre Passive Vent Set - Terracotta
Model: RYTAC7HPTCW
Search: QS12330
-
DETAILS
RYTAC7HPTCW - RYTONS 125MM BAFFLED COWLED AIRCORE CONTROLLABLE PANEL - TER
AC7HPCW – Rytons Cowled Baffled Controllable LookRyt® AirCore®
- Retro-fitted core ventilator with external cowl for background room ventilation.
- The tube contains a light and draught reducing system of baffles which allow a high equivalent area over 6500mm².
- External cowl protects against excessive weather conditions and alleviates air blasts through the cavity.
- New and uniquely designed internal LookRyt® panel disperses air evenly into the room and may be painted or wallpapered to match décor.
- LookRyt® panel manually adjusted with an easy push/pull action giving the occupier full control over the amount of ventilation let into the room.
- External water baffle prevents the transfer of water across the cavity.
- Interlocking components aid correct positioning, alignment and easy installation.
- Cowl and external grille U.V. stabilised to slow down the effects of sunlight.
- LookRyt® panel easily secured using fixing screws provided.
- Verifiable equivalent area confirmed by the BRE.
Equivalent Area
6700mm² (67cm²) per set.Size
- Cowl: 217mm L x 210mm H x 93mm D.
- External Grille: 166mm L x 160mm H.
- Tube: 127mm (5″) Dia. x 358mm L (a maximum of 63mm may be cut from each end of the tube).
- LookRyt® Panel: 172mm L x 172mm H.
Colours
- Magnolia internal LookRyt® panel (may be decorated).
Choice of external grille:
- Terracotta (RYTAC7HPTCW)
- Buff/Sand (RYTAC7HPBCW)
- White (RYTAC7HPWCW)
Composition
- Cowl: U.V. stabilised high impact polystyrene.
- External Grille: U.V. stabilised high impact polystyrene.
- Tube: High impact polystyrene. The tube contains recycled plastic.
- LookRyt® Panel: High impact styrene.
- Softening / Melting Points: Tube: Softening point 70ºC, melting point 120ºC.
Installation
Warning: DO NOT attach the internal LookRyt® face panel until the internal LookRyt® backplate is fixed to the wall using the screws provided. Screws: The four screws provided are for fixing the internal LookRyt® backplate to the internal wall. Any suitable fixings can be used for the external grille, dependent on the external surface.
- To comply with Building Regulations Part F the ventilator should be sited not less than 1.7m above floor level.
- Drill a hole using a 127mm diameter core drill.
- Cut the tube to length if necessary (maximum reduction 63mm from each end) then insert the tube into the hole.
- Align and push-fit the external louvre and backplate (screw into position for extra security). Tip: Save installation time by securing the external louvre grille to the backplate with a mastic sealant.
- Fasten the cowl to the brickwork through the preformed holes in the flange around the cowl.
- DO NOT attach the internal LookRyt® face panel until the internal LookRyt® backplate is fixed to the wall using the screws provided.
- Align and screw the internal LookRyt® backplate to the wall using the screws provided.
- ONLY when the internal LookRyt® backplate is screwed in place can you push-fit the internal LookRyt® face panel.
- The grille may then be opened and closed using a push/pull action.
- The internal LookRyt® face panel can be painted or wallpapered to match the room décor.
UK Regulations and Standards
- The Building Regulations 2000, Approved Document F.
- The Building (Scotland) Regulations, Mandatory Standard 3.14.
- The Building Regulations (Northern Ireland) 2000, Technical Booklet K.
- British Standard BS 5250:2011.
Questions and Answers
-
FEATURES
Features
- SIZE: Cowl: 217mm L x 210mm H x 93mm D. External grille: 166mm L x 160mm H. Tube: 127mm (5″) Dia. x 358mm L (if required, a maximum 63mm may be cut from each end of the tube). LookRyt panel: 172mm L x 172mm H.
- EUIVALENT AREA: 6,700mm² (67cm²) per set (tested to BS EN 13141-1:2004 and independently verified by the BRE).
- Allows the introduction of fresh outside air into the room to disperse moisture, odours and other airborne pollutants.
- Unique draught reducing panel manually adjusted with an easy push/pull or tilt action allowing air to be controlled as required.
- Paint or wallpaper the panel to match room decor for a discreet appearance.
-
TECHNICAL
Technical Specifications
Product Type Uncategorised Product Group Passive Ventilators Colour Terracotta Quick Search: QS12330 -
REVIEWS
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
-
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
You may also like
-
List Price: £79.19
Only: £17.15 -
List Price: £31.10
Only: £18.47 -
-
List Price: £55.01
Only: £38.50 -
List Price: £38.77
Only: £29.08 -
List Price: £77.26
Only: £32.99