Nuaire Drimaster DRI-ECO-4S Eco 4 Way Heater and Boost Control Switch
-
DETAILS
This remote 4 button switch controls the running functions of both the Drimaster unit itself as well as the integral heater.
By splitting the control options the occupier is presented with the ability to choose the function which best suits their home. -
FEATURES
Features
- Compatible with Drimaster ECO HEAT
- Control from any room in your home
- Boost lasts for 2 hours the returns to normal speed
- Only one wireless speed control unit can be used per unit.
- Can be used in conjunction with Humidity Sensor (NUADRI-ECO-RH) and/or CO2 Sensor (NUADRI-ECO-CO2)
-
TECHNICAL
Technical Specifications
Product Category Controllers and Sensors Product Type Controller Product Group Fan Ancillaries Product Variety 4 Way Heater and Boost Colour White Barcode 8714724992214 Barcode - Type EAN Manufacturer Product Code DRI-ECO-4S Quick Search: QS45551 -
REVIEWS
-
Ian MorrisDate Added: Saturday 07 May, 2022
Haven’t had to use it much - works ok. -
Damon BuckleDate Added: Monday 10 January, 2022
Would be useful to know when the heater is on, perhaps with feedback to the display / on the unit? -
Martin ClarkeDate Added: Tuesday 06 July, 2021
Great product, paired up with unit straight away -
Colin MorcomDate Added: Saturday 05 December, 2020
Removed all the condensation with in a couple of weeks from installing -
Richard ClarkeDate Added: Thursday 05 September, 2019
Works very well in controlling the Drimaster without the need to get the step ladders out. Can put it in boost mode very easily when cooking or taking a bath etc. -
Andrew GlanvilleDate Added: Wednesday 04 April, 2018
Installed this with the drimaster and is an excellent addition. This is used to good effect if a shower produces excessive steam and condensation to allow for the user to boost the airflow. Not a cheap addition and maybe could be provided as a complete kit but would still highly recommend buying this. -
Brian ButlerDate Added: Saturday 24 March, 2018
very good its worth the extra -
Rachel ArnottDate Added: Wednesday 10 January, 2018
This is just a must have for the drimaster. You still need to go up to change the numbered flow and so on but you can use this wireless to give a boost and add heat once you have figured out the top bit. Simple to adhesive to the wall with its sticky back too. And works further than expected! -
Kevin CousinDate Added: Friday 08 December, 2017
Easily fits to any surface and took seconds to bind with the Nuaire PIV heat. Excellent product -
Alan DaviesDate Added: Tuesday 21 November, 2017
Works very well and simple to pair with the main unit. Purchased along with the Nuaire Drimaster which is incredible.
-
-
Q & A
Product Questions
Questions and Answers, do you need more information about this product?
Ask a QuestionYour question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
#1LocationWould it be ok to locate the out flow vent in a bathroom ?
Question by Matthew Saint-Gregory, 28-11-2017Hello Matthew
You have sent the link to the 4 way switch control but I assume you are referring to the input air diffuser from the Drimaster Heat PIV.The short answer to either though, is no as the switch is hard wired and not allowed for bathroom installation and the PIV is a whole house system and too powerful for a single room, the input air should be located in a ceiling at high level, preferably over the stairwell so that air is distributed throughout the dwelling. Bathroom ventilation should be extract or heat recovery, not positive input.Replied by i-sells, 28-11-2017#2Power SourceHi, I have watched the video on this remote switch and it appears as a unit that is not connected to any power source, just binded and attached to a wall. However a previous answer suggests it needs to be hard wired. Can you confirm which is the case? Thanks
Question by Adrian Stainsby, 09-12-2017Hi Adrian
The description of remote switch is purely one of being located away from the vicinity of the Drimaster it does need to be hard wired.Replied by i-sells, 11-12-2017#3power sauce// and permenant fixingI have the switch. it must get power from somewhere but where as i cant see any battery compartment. also if i needed to make the fixing more solid than a sticky pad, is there a fixing plate design for it. Many Thanks.
Question by Graham, 27-12-2017Hello Graham
Thank you for your question. Remove the switch fixing plate by inserting a flat head screwdriver in the rear ofthe switch on the left or right side, underneath the fixing plate and gently leverup the plate until the fixing lug releases, repeat for the opposite side. This willgive access to the battery compartment on the rear of the PCB and releases thefixing plate so that it can now be separately mounted to the wall (screws arenot provided). Reassemble the remaining components and press into place, anaudible click will be heard. 1x CR 2032 battery is provided and expected lifetimeis 6 years under normal use. As for the sticky pad this is provided as the switch will not fit into a single pattress box. If I can help any further please do not hesitate to contact meKind RegardsAnitaReplied by i-sells, 03-01-2018#4Boost Control TimeI have the DRI-ECO-HEAT-HC and the 4 way control switch (both very good products by the way) If I press the boost button before I go to bed it works just fine. When I get up in the morning it has gone back to normal speed. My question is how long does it boost for before going back to normal or should it stay on until I press the normal button again? I can't find any information on this in the manual. Thank you.
Question by Austin Young, 09-01-2018Hello Austin
Thank you for your question. The boost button gives the occupant the option to temporarily increase the speed of the fan when high levels of moisture are being produced. The unit will revert back to its usual settings after two hours. If I can help any further please do not hesitate to contact meKind RegardsAnitaReplied by i-sells, 09-01-2018#5Switch wireingHi, I understand that this switch requires hard wiring to the DriMaster unit, what are the requirements for the cable, does it use twin&earth or simply data cable i.e. Alarm/telephone/ethernet ? Thanks chris
Question by Chris Spencer, 13-01-2018Hello Chris
Thank you for your question. This controller is wireless. Remove the switch fixing plate by inserting a flat head screwdriver in the rear ofthe switch on the left or right side, underneath the fixing plate and gently leverup the plate until the fixing lug releases, repeat for the opposite side. This willgive access to the battery compartment on the rear of the PCB and releases thefixing plate so that it can now be separately mounted to the wall (screws arenot provided). Reassemble the remaining components and press into place, anaudible click will be heard. 1x CR 2032 battery is provided and expected lifetimeis 6 years under normal use.Normal - If the normal button is used the unit will return to its standardoperation programmed at the diffuser.Boost - If the boost button is used, the fan speed will increase to maximum anda ‘P’ will be shown in the display.If I can help any further please do not hesitate to contact meKind RegardsAnitaReplied by i-sells, 15-01-2018#7Red lightHi we have had the 4 way heater & boost control switch installed for just over 12 months. When I press the controls now I receive a red light instead of the usual green light .Does this mean the battery needs replacing or has the control become unlinked to the air unit? Regards Ray
Question by Ray Bayliss, 01-08-2021Good morning Ray. It would appear the switch is no longer bounded to the unit. See instructions on how to bind it below.
Once the fan unit is in binding mode a switch may now be bound.1. Press and hold the ‘Boost’ & 'Heater off' button for 2-5 seconds.2. The LED will flash GREEN twice when bound.To check the binding of a switch, press “boost”. A green LED denotesthat the switch is bound and the fan should run at full speed. A red LEDdenotes that the switch is not bound.If you have any further issues, give us a call quoting the serial number of the unit itself.Kindest regards,MarcReplied by i-sells, 02-08-2021#8Is this compatible with NUADRI-ECO-NOX-HEATHi I wanted to purchase the following PIV: Nuaire Drimaster Eco NOX Heat Positive Input Ventilation Unit with NOX Filters and Integral 400W Heater I wanted the following wireless control for the unit above: Nuaire Drimaster DRI-ECO-4S Eco 4 Way Heater and Boost Control Switch Can you please advise whether this wireless control is compatible the PIV mentioned above. Thank you
Question by Hassan Khan, 07-01-2023Good morning Hassan.
Yes the 4-way switch is suitable for that unit.Kind regards,MarcReplied by i-sells, 09-01-2023#9FunctionsHi. I know the boost runs for 2 hours if you press it but if you wanted to stop the boost earlier can you just press the normal to cancel it? How far away can this work?
Question by spencer cottle, 19-01-2023Hello Spencer
Thank you for your question. Yes to stop the boost press the normal button and this will put the unit back to normal.Kind RegardsAnitaReplied by i-sells, 19-01-2023#10Drimaster 4 way switchHi, I am looking at purchasing the Drimaster DRI-ECO-HEAT-HC along with the 4 way heater switch. I am still unsure if I need the heated version or not as I do have a radiator which is located on my hallway almost directly under the location of where the PIV unit will go however the 4 way switch does have a 'heater off' button. I am therefore thinking of playing it safe and buying the heater version with the switch which should allow me to turn the heater off when the central heating is on. My question is if I push the heater off button will it remain off until I next push the button, or, does it turn the heater off for a set period of time like the boost function?
Question by Matt Evans, 01-03-2023Good morning Matt. The heater button on the 4-way switch does activate and de-activate the heater, so if you turn it off, it will stay off until you decide to turn it back on again.
Kind regards,Marc.Replied by i-sells, 02-03-2023 -
DELIVERY
Delivery: You'll receive in: Cost Min Order Free Delivery 3 to 5 Days FREE £100 Standard 2 to 4 Days £4.99 - Express Courier Next day+ £9.95 Any View Full Delivery Info
FREE Delivery for orders over £100 inc VAT.
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.