Pack of 5 x Kair 150mm - 6 inch / 2 Metre Plastic Ducting Pipe Long Lengths - Rigid Straight Duct Channel

PACK OF 5 x KAIR SYSTEM 150 ROUND PIPE - 2 METRE LENGTH - 150MM DIAMETER

Note: Please note that this 2 metre ductwork pipe is usually delivered direct from factory. Therefore timed delivery options and store collection are by special arrangement. Standard deliveries are as normal.

Product Information:

White Plastic Ducting Pipe - 150mm diameter x 2000mm (2 metre) length  -  Please note that our straight lengths of Round plastic 150mm ducting tube are ';female'; i.e. round duct fittings such as bends and reducers are ';male'; and generally slip inside the duct tube. To connect two ';female'; straight duct lengths together use a System 150 Male Connector (Part: "DUCVKC365").

Kair System 150 (SYS-150) Round Ducting provides superior airflow performance when compared with 150mm flexible or 180mm x 95mm rectangular ducting. It is perfect for long duct runs for high power extraction systems and whole house ventilation purposes where pressure drop needs to be minimised.

• Made in the UK.
• Outer Diameter - 152mm
• Built to last out of high-quality white uPVC plastic Material.
• Max / Min Temperature: +60c / -15c.
• Round rigid ducting provides superior airflow performance vs. comparative size rectangular or flexible duct.
• Suitable to use in compliance with Part F Building Regulations.
• Airflow performance independently tested by BSRIA or BRE.
• Free Air = 17,673 mm².
• Static Pressure Drop in Pascals: 15 l/s = 0.20 Pa - 30 l/s = 0.80 Pa - 60 l/s = 2.40 Pa.

Installation Tips:

1. Kair plastic ducting pipe is lightweight & easy to install. You simply push-fit the duct pipe and fittings together. For permanent fixings, you can seal the joints with a method of your choice (Popular options include silicone sealant, solvent cement, or tape).
2. Plastic ducting can be carefully cut to the required size using a hacksaw. Offcuts are always useful to keep to hand for joining two male fittings
3. Lengths of duct channel can be joined together using a male connector (Part: "DUCVKC365").
4. Use round pipe fixing clips to fix ductwork to walls and ceilings and support ducting tube (Part: "DUCVKC442C").
5. If your duct run passes through a particularly cold area, we would recommend considering using our pre-insulated ducting to avoid condensation building up within your ductwork. Click here to view our range of pre-insulated plastic ducting.

Looking for an alternative size?

Kair plastic ducting pipes are available in the following sizes:

Round Systems:

Click here to view our full range of round pipes

Rectangular Systems:

Click here to view our full range of rectangular pipes

Looking for Compatible Products?

Compatible with the extensive Kair SYS-150 range of fittings, outlets, and grilles.

• You can connect this pipe to Kair System 150 rectangular ducting pipe (Part: "DUCVKC651") using a straight adaptor (Part: "DUCVKC650").
• Alternatively use Rectangular-To-Round Male Elbow (Part: "DUCVKC655").
• Lengths of duct channel can be joined together using a male connector (Part: "DUCVKC365").
• Use round pipe fixing clips to fix ductwork to walls and ceilings and support ducting tube (Part: "DUCVKC442C").

Click here to view the full range of Kair 150mm Round / 180mm x 95mm Rectangular Ducting Products.

Common applications:

The Kair range of plastic ducting is commonly used for the following applications:

• Bathroom Extractor Fan Ducting
• Kitchen Extractor Fan Ducting
• Cooker Hood Ducting
• Heat Recovery Unit Ducting
• Air Conditioning Ducting
• HVAC Ducting
• Tumble Dryer Ducting
• Hydroponics Ventilation Ducting
• Whole House Ventilation Ducting
• Positive Input Ventilation System Ducting