White plastic rectangular ducting pipe - 150mm x 70mm x 1000mm (1 metre length).
Kair System 125 (SYS-125) Rectangular Ducting is designed for use with medium capacity extraction systems and cooker hoods. It is perfect for flush fitting against ceilings and walls and can be concealed above wall units or inside ceiling voids.
Kair plastic ducting pipes are available in the following sizes:
|Round Ducting System||1 Metre Length||1.5 Metre Length||Flexible Alternative|
|100mm Round (System 100)||DUCVKC250||DUCVKC299||DUCP0092/102/35|
|125mm Round (System 125)||DUCVKC267||DUCVKC269||DUCP0092/127/35|
|150mm Round (System 150)||DUCVKC670||DUCVKC671||DUCP0092/152/35|
|Rectangular Ducting System||1 Metre Length||1.5 Metre Length||Flexible Alternative|
|110mm x 54mm (System 100)||DUCVKC249||DUCVKC240||DUCR3M/110/55|
|150mm x 70mm (System 125)||DUCVKC604||DUCR3M/150/70|
|180mm x 95mm (System 150)||DUCVKC651||DUCR3M/220/90|
|204mm x 60mm (System 204)||DUCVKC5604||DUCVKC5628||DUCR3M/206/62|
|220mm x 90mm (System 220)||DUCVKC5704||DUCVKC5728|
|234mm x 29mm (System 225)||DUCVKC706|
|310mm x 29mm (System 300)||DUCVKC754|
The Kair range of plastic ducting is commonly used for the following applications:
|Flat System (mm)||150x70|
|Diameter - Outer (mm)||150 x 70|
|Spigot size (mm)||150 x 70|
|Free Area (mm²)||9674|
|Packaged Weight (Kg)||1|
|Packaged Length (mm)||1000|
|Packaged Width (mm)||150|
|Packaged Height (mm)||70|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
|Economy Delivery||Not Eligible|
|Greenwood Airvac (similar)||GD801.2|
|Pressure Loss (Pa) 15 l/s||0.61|
|Pressure Loss (Pa) 30 l/s||1.95|
|Pressure Loss (Pa) 60 l/s||6.23|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Is there a 90deg horizontal connector for this product?
The System 125 (150 x 70) 90 degree horizontal bend part number is DUCVKC605 and can be viewed here
Please let me know if you need any further advice.
150mmx70mm rect. ducting white. This channel is suitable for a pipe cover for two unsightly copper pipes exiting the top of my domestic boiler doing a left 90 degree turn and then a right 90 degree turn then vertically into my ceiling -a vertical distance of some 300 mm.I have to cut out one side the 150 mm width to fit the cover over two the parallel copper pipes. Do manrose make a 150mmx70mm end cap for the 90 degree doglegs?
Thank you for your question. Unfortunately the end caps do not come in 150mm x 70mm. Also the temp on our plastic ducting is 40degrees anything hotter than this will melt. You can get pipe covers and caps from Wickes, B&Q and Home Base.
Does the front push/clip onto the back section like cable trunking?
What colour is it, Grey? if so does it come in white?
Would this be suitable for using as ducting from a cooker hood to run across several wall units behind the cornice. The main pipework from the hood is 125mm round flexy so would need to join into the rectangular
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|