Airbrick With Damper Flap 150X70mm Product Details: Kair SYS-125 Airbrick - White Colour - Cover Size: 221mm x 80mm - Spigot Size: 146mm x 65mm - Max / Min Temperature: +60c / -15c. Part of the Kair Rectangular System 125 Ducting Range (150mm x 70mm Duct Dimension).Easy to fit and durable. Designed to connect to other Kair SYS-125 parts. The spig...
Kair SYS-125 Airbrick - White Colour - Cover Size: 221mm x 80mm - Spigot Size: 146mm x 65mm - Max / Min Temperature: +60c / -15c. Part of the Kair Rectangular System 125 Ducting Range (150mm x 70mm Duct Dimension).
Easy to fit and durable. Designed to connect to other Kair SYS-125 parts. The spigot on the back is 146mm x 65mm, therefore, both straight pipe (Female fittings) and connector bends (Male fittings) will fit over the spigot. Also fits other non-Kair ranges. Built to last out of Polystyrene/Polypropylene PVC material.
The performance and dimensions of the Kair System 125 Range make it ideal to use in Kitchens and Bathrooms, where duct runs can easily be concealed above units or ceiling voids. Perfectly suited for ducting your bathroom or kitchen extractor fan, hydroponics, in-line extract fan, tumble dryer, or a cooker hood. This air brick can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, air conditioning, HVAC, and Heat Recovery Systems.
Airflow performance independently tested by BSRIA or BRE. Free Air: 4,114mm2. Static Pressure Drop in Pascals: 15 l/s: 23.66 Pa - 30 l/s: 44.40 Pa - 60 l/s: 100.39 Pa.
Genuine Kair Product & covered by the Kair 100% Satisfaction Guarantee. Made in the UK. Compatible with the extensive Kair SYS-125 range of fittings, outlets, and grilles. Also available in brown, terracotta, and beige - Please search "Kair SYS-125 Airbrick" for our full range.
|Flat System (mm)||150x70|
|Product Group||Plastic Ducting|
|Spigot size (mm)||146|
|Colour - External||White|
|Packaged Weight (Kg)||0.09|
|Packaged Length (mm)||55|
|Packaged Width (mm)||220|
|Packaged Height (mm)||80|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
|Barcode - Type||EAN|
|Pressure Loss (Pa) 15 l/s||23.66|
|Pressure Loss (Pa) 30 l/s||44.4|
|Pressure Loss (Pa) 60 l/s||100.39|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
What does the damper flap do in the duct please? Thanks Peter
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|