White PVC flexible ducting for use with extractor fans, cooker hoods, and tumble dryers - 150mm x 70mm x 3000mm length (3 Metre)
Flexible ducting offers an easy solution for running ducting around obstacles or in tight spaces where using rigid plastic ducting is unsuitable. Kair flexible PVC ventilation ducting hoses are manufactured in the UK with a light wire spiral reinforcement inside white PVC ducting material. Our flexible duct lengths come packed compressed for ease of shipment and can be cut on site to desired length.
Flexible ducting offers an easy solution for running ducting around obstacles or in tight spaces where using rigid plastic ducting is unsuitable. There are a wide variety of Kair connectors, clips, and tapes available to provide effective connections to the Kair Rigid Round and Rectangular ducting ranges to offer you greater flexibility in completing your install.
Perfectly suited for ducting your Bathroom or Kitchen extractor fan, Hydroponics, In-Line Extract Fans, or Cooker Hood. This flexible hose can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, air conditioning, positive pressure ventilators, HVAC, and Heat Recovery Systems.
If your duct run passes through a cold space such as a loft, we would recommend using an insulated ducting hose. Click here to view the full range of Kair Domestic Insulated Ducting
This product is part of the Kair Ventilation System 125 Plastic Rectangular Ducting Range (SYS-125). System 125 Plastic Flexible ducting offers an easy solution for running ducting around obstacles or in tight spaces where using rigid plastic round or rectangular ducting is unsuitable. This system is suitable for extractor fans and cooker hoods and is compatible with an extensive range of fittings outlets and grilles.
There are a wide variety of Kair connectors, clips, and tapes available to provide effective connections to the Kair round and rectangular ducting ranges to offer you greater flexibility in completing your install.
The Kair range of flexible ducting hoses are commonly used for the following applications:
|Flat System (mm)||125|
|Product Type||Flexible Hose|
|Packaged Weight (Kg)||0.45|
|Packaged Length (mm)||95|
|Packaged Width (mm)||162|
|Packaged Height (mm)||95|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
I am a little confused, is this suitable for a kitchen extractor that requires 150mm ducting, as you indicate it is equivalent to 5"? I need to ensure maximum extraction.
This presumably fits the rigid 125 pipe? I propose to use small lengths to create non standard angle bends. How do you normally seal the ends. Tape?
Thank you for your question. Yes the flexible hose will connect to rigid 125mm pipe by fitting over the rigid pipe and sealing the joint with duct tape. We also do a flexible bend which is approx.500mm in length the product code for this item for you to have a look at is QS362.
If I can help any further please do not hesitate to contact me.
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|