KAIR 110MM X 54MM (4X2) RECTANGULAR DUCTING STRAIGHT FEMALE CONNECTOR
Female connector to join lengths of duct channel. Male Flat Ducting Pipe (Part: "DUCVKC249") will fit inside connector. 110mm x 54mm Flexible Hose (Part: "DUC3M/110/55") will fit over the connector.
Kair ducting is easy to install, just push-fit ducting and connector together. For permanent fixings, seal joints with a method of your choice (Popular options include silicone sealant, solvent cement, or tape).
Kair System 100 (SYS-100) Rectangular Ducting is designed for short duct runs and it can be easily concealed due to its low profile. It is perfect for installations requiring low extraction rates such as bathrooms, toilets, and utility rooms. It can be flush fitted against ceilings and walls and can be concealed above wall units or inside ceiling voids.
Kair plastic ducting is lightweight, durable and suitable for commercial and domestic use. It is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or cooker hood. This connector can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.
Not quite the right size?
We stock a range of flat channel connectors for the following duct sizes:
Looking for compatible ducting?
|Flat System (mm)||110x54|
|Socket size (mm)||110x54x30|
|Packaged Weight (Kg)||0.045|
|Packaged Length (mm)||62|
|Packaged Width (mm)||113|
|Packaged Height (mm)||58|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
|Vent Axia (similar)||436605|
|Polypipe / Domus (similar)||DD020|
|Pressure Loss (Pa) 15 l/s||0.03|
|Pressure Loss (Pa) 30 l/s||1.4|
|Pressure Loss (Pa) 60 l/s||6.30|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
is this product fire rated
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|