When ventilation ducting is installed and enters or exits a fire compartment in a house apartment or multi-storey building it may be necessary to meet Document B of the Building Regulations to ensure that any fire is contained in one area and delayed from spreading for a time to allow the occupants of the building to escape. If ventilation ducting penetrates a Fire Rated separating element of construction such as a wall ceiling or floor slab then a Fire Stop needs to be fitted around the ducting at the position of the penetration to maintain the fire resistance of the separating element. The requirement for Fire Stops falls into two broad categories comprising Partition Walls and Masonry Walls and Floors.
Kair can offer a range of Fire Stops for these applications using Kair FireWraps (FW) Kair Galvanised Metal Sleeves (FWS) and Kair FireCuffs (FC). The most appropriate European Standard for penetrations in Partition Walls is BS EN 1366-3: 2009 and all of our partition products have been tested to this standard under the most stringent test conditions with both ends of the ducting left open giving the most realistic simulation of actual installed conditions.
For Masonry Walls and Masonry or Concrete Floors, we have test evidence to BS 476 Parts 20 & 22. Kair FireWraps are available in both rectangular and round sizes from 100mm round to 300mm x 29mm Rectangular. For the full range search Kair FireWrap.
Product Category | Fire Rated |
Round System (mm) | 125 |
Product Type | Fire Wrap |
Product Group | Plastic Ducting |
Length (mm) | 470 |
Width (mm) | 6 |
Height (mm) | 100 |
Weight (Kg) | 0.219 |
Packaged Weight (Kg) | 0.219 |
Packaged Length (mm) | 470 |
Packaged Width (mm) | 6 |
Packaged Height (mm) | 100 |
Barcode | 5060272543181 |
Quick Search: | QS9690 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
We have been sent a fire wrap product that states it is for rectangular ducting?? do you have two products and have we been sent the wrong one???
Good Morning Ben
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |