Safe metal ducting contains rubber seals while standard metal ducting does not.
Call us 0208 463 9696
Bathroom zones are just a way of telling which extractor fan you can install in a specific place.
This ever popular range of extract/intake ventilating units continues to satisfy the most demanding requirements of efficient ventilation. The Standard range unit is supplied without a shutter. The shutter is available as an accessory which can be easily fitted within the unit.
Standard range fans are suitable for most forms of glazing or can be wall mounted in a Vent-Axia fixing plate. Vent-Axia's patented spigot and ring method of fixing ensures easy installation and weather proof joint. The simple integrated component design makes installation and servicing easy.
Purpose designed enclosed motor. Suitable for running at any angle. Quiet running, enclosed.
Supply voltage 220-240V/1/50 Hz.Suitable for operation in ambient temperatures from -40° to +50°C. Fitted with Standard Thermal Overload Protection (S.T.O.P.).
Type SD/R. This extract/intake shutter fits inside the Vent-Axia unit and closes against unwanted backdraughts. It can be fitted at the same time as the unit or at a later date if required.
Airflow operated for extract use, cord operated lock for intake use. For all models mounted in vertical surfaces.
The Rangemaster controller is recommended for use with this model to provide full function control of the fan plus the option of sensor mode using a selection of electromechanical switches to provide automatic switching of the fan. Alternatively, single speed extract is achieved using a normal On/Off switch.
Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools.
Where Standard range units are installed in low positions, finger guards provide extra protection to VDE, DIN 31001.
Rangemaster ControllerInfinitely variable speed control, adjustable minimum speed setting. Choice of extract/intake. Sensor mode switch enables any of a number of external electro-mechanical switches eg: Ecotronic, HumidiSwitch, ThermoSwitch and TimeSwitch to control the fan.
Multi-unit ControllerFor groups of up to 5 units of any one size up to a total of 400 watts. Extract/intake and infinitely variable speed control. Do not mix T-Series with Standard Range ventilating units on one controller.
TimeSwitchElectronic timer. Can be pre-set for a time overrun of 1-35 minutes. Maximum load 2 (1 inductive) amps.
Ambient Response Humidity SensorSelf programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature.Night time RH increment setback feature.
Air quality sensorAutomatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas.
Ecotronic Humidity SensorThe Ecotronic Humidity Sensor is an adjustable set point, solid state controller. A pullcord provides manual override, indicated by lamp. Adjustable from 65% to 90%RH. Ecotronic includes a relay and can be used with T-Series controller sensor mode.
Supply and install a Standard Range Window fan as manufactured by Vent-Axia Ltd, Fleming Way, Crawley, West Sussex, RH10 9YX Telephone: 01293 526062.
The fan should be suitable for all forms of single glazing, including wire cast, reeded, leaded lights and fixing plates up to 10mm thick.
The fan should have the option of a backdraught shutter.
The fan should be fully reversible and be able to be controlled by using variable speed controllers or by humidity, air quality or TimeSwitches.
The unit should meet with Document F of the Building Regulations and be Demko Approved.
The motor should be suitable for mounting at any angle and suitable for operation in ambient temperatures from -40°C to +50°C and should be fitted with self resetting Standard Thermal Overload Protection (S.T.O.P.).
Delivery usually takes 2 - 4 working days. Orders over £100 are delivered free with UK Standard Deliveries
All our online orders are processed through a secure payment service using up to 256 bit encryption system.
Need help with your order?
Call us on 020 8463 9696
Further information can be found here.
i-sells.co.uk supplies our wide range of products daily throughout the UK -
export enquiries are welcome. I-sells for all your ducting, ventilation, air conditioning and damp control needs
Prices include VAT @ 20% where applicable for
trade and export purposes
Express delivery options available on orders placed before noon for in stock items.
2 St John's Parade, Sidcup High Street, Sidcup, Kent, DA14 6ES Get Directions
Contact us: email@example.com Telephone: 0208 463 9696 (international +44 20 8463 9696) Vat Registration number: GB788304203