Square wall plate with 4 x holes for fixing screws and round socket. Designed to improve the aesthetics of ducting installations.
Use to cover areas where ducting passes through walls or other solid surfaces. Can be used to cover existing holes. Kair 100mm rigid pipe (Part: "DUCVKC250") or 102mm Flexible Hose (Part: "DUCP0092/102/35") will pass-through socket.
Kair wall plates are perfect for flush fitting against ceilings and walls. Kair ducting is perfectly suited for ducting your bathroom or kitchen extractor fan, hydroponics, in-line extract fans, tumble dryer, or a cooker hood. This item can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input ventilation, air conditioning, HVAC, and heat recovery systems.
Looking for compatible ducting?
This item is compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles.
|Product Category||Wall Plates|
|Round System (mm)||100|
|Product Type||Wall Plate|
|Product Group||Plastic Ducting|
|Diameter - Inner (mm)||39|
|Packaged Weight (Kg)||0.037|
|Packaged Length (mm)||150|
|Packaged Width (mm)||3|
|Packaged Height (mm)||150|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
I am trying to fit an air vent on a plasterboard wall, i need to fix it securely on the back of the board, and may need to remove the vent from the front for cleaning etc. ideally it acts as an inspection cover can you help me out with this purchase please jim
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|