Female connector to join lengths of duct channel. Kair 220mm x 90mm pipe - (Part: "DUCVKC5704") will fit inside the connector.
Kair ducting is easy to install, just push-fit ducting and connector together. For permanent fixings, seal joints with a method of your choice (Popular options include silicone sealant, solvent cement or tape).
Kair System 220 ducting has comparable airflow performance to 150mm Round Duct. It is best utilised as a part of a ducting system for high powered cooker hood extractors and whole-house ventilation systems. Kair 100mm Ducting is designed for small extractor fans and low powered cooker hoods. Suitable to use in compliance with Part F Building Regulations.
Kair plastic ducting is lightweight, durable and suitable for a variety of uses. It is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or a cooker hood. This connector can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.
We stock a range of flat channel connectors for the following duct sizes:
Click here to view our full range of Flat Channel Connectors.
Click here to view the full range of Kair 220mm x 90mm Rectangular Ducting Products.
Click here to view the full range of Megaduct 220 Rectangular Ducting Products.
Product Category | Connectors |
Flat System (mm) | 220x90 |
Product Type | Connector |
Product Group | Plastic Ducting |
Length (mm) | 75 |
Width (mm) | 226 |
Height (mm) | 95 |
Weight (Kg) | 0.117 |
Packaged Weight (Kg) | 0.117 |
Packaged Length (mm) | 75 |
Packaged Width (mm) | 226 |
Packaged Height (mm) | 96 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272547875 |
Quick Search: | QS18939 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |