Kair 90 degree ducting straight adaptor with round and rectangular spigots. At one end there is a fixed 150mm Round Male Spigot that fits inside Kair 150mm round duct pipe (Part: "DUCVKC670") or flexible hose (Part: "DUCP0092/152/35").
The other end is a female spigot and fits over Kair 220mm x 90mm Rectangular Duct Pipe (Part: "DUCVKC5704"). PVC Flexible Hose 220mm x 90mm (Part: "DUCR3M/220/90") will fit over the spigot.
Perfectly suited for ducting your Bathroom or Kitchen extractor fan, hydroponics, in-line extract Fans, tumble dryer, or a cooker hood. This bend can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input ventilation, air conditioning, HVAC, and heat recovery systems.
Kair System 220 ducting has comparable airflow performance to 150mm round duct. It is best utilised as a part of a ducting system for high powered cooker hood extractors and whole-house ventilation systems.
Kair 150mm Round duct is ideal for high-powered cooker hoods and extract systems, and long ducting runs for whole-house ventilation systems.
Click here to view the full range of Kair 220mm x 90mm Rectangular Ducting Products
Click here to view the full range of Kair 150mm Round / 180mm x 95mm Rectangular Ducting Products.
Product Category | Adaptors |
Round System (mm) | 150 |
Flat System (mm) | 220x90 |
Product Type | Adaptor |
Product Group | Plastic Ducting |
Product Variety | 220mm x 90mm to 150mm |
Weight (Kg) | 0.288 |
Packaged Weight (Kg) | 0.288 |
Packaged Length (mm) | 200 |
Packaged Width (mm) | 155 |
Packaged Height (mm) | 230 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272546649 |
Quick Search: | QS18941 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Hello, What connectors do I need to join the round end to a NEFF 150mm extractor hood and the rectangular end to a length of DUCR3M/220/90 flexible ducting? Also, what size grille and connector do I need to vent the ducting out through UPVC cladding?
Hello Miles
Thank you for your question.
You will require a female sleeve QS1591 or a piece of 150mm pipe QS392 to join the connection to the cooker hood. The rectangular end of the connection will go into the DUCR3M/220/90 and secure with tape. To vent outside use another C5713 and 150mm pipe with a QS209 grille.
If you need any further assistance please give me a call on 0208 463 9683.
Is the Offset Ducting Adaptor and the range of accessories made of the same material OK to be used on a cooker hood extractor?
Hi,
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |