This vertical 45-degree elbow bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives.
Both sides are female sockets. The ends will fit over Kair System 100 (110mm x 54mm) flat ducting pipe (Part: "DUCVKC249").
Kair System 100 (SYS-100) 110mm x 54mm rectangular ducting is designed for short duct runs and it can be easily concealed due to its low profile. It is perfect for installations requiring low extraction rates such as bathrooms, toilets, and utility rooms. It can be flush-fitted against ceilings and walls and can be concealed above wall units or inside ceiling voids.
Compatible with the extensive Kair SYS-100 range of pipes, fittings, outlets, and grilles.
The Kair range of plastic ducting is commonly used for the following applications:
|Flat System (mm)||110x54|
|Product Group||Plastic Ducting|
|Product Variety||45 Degree Vertical|
|Socket size (mm)||25 x 110 x 54|
|Packaged Weight (Kg)||0.09|
|Packaged Length (mm)||90|
|Packaged Width (mm)||115|
|Packaged Height (mm)||60|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
|Vent Axia (similar)||441655|
|Polypipe / Domus (similar)||DD075|
|Pressure Loss (Pa) 15 l/s||2.57|
|Pressure Loss (Pa) 30 l/s||12.72|
|Pressure Loss (Pa) 60 l/s||62.99|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Is this 45º bend availible in 125mm or 150mm systems please?
I can see this in white, but do you have it in black?
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|