A lowline pitched roof service terminal for use with tiles and slates. The Ubiflex skirt, enables the unit to be dressed into most tile profiles and slates.
Suitable for 100, 125, 150 and 160mm connections on tiled and slated pitch roofs.
No need to identify the make or design of the tiles or the slates.
Comprises a flat box hood on a circular upstand, a 500 x 500mm Ubiflex skirt (flashing) and stepped adapter which allows connections for 100, 110, 125, 150 and 160mm diameter ducting. PVC-u terminal.
The unit may also be used to terminate soil and vent pipes where an external pressure test is not required.
Design and Performance
Design and Performance Polypipe’s Domus Universal Roof Cowl is designed for use with tiled and slated pitched roofs. The Roof Cowl comprises of a flat box hood on a circular upstand, a 500 x 500mm flashing skirt and stepped adaptor which allows connections for Domus Ø100mm, Ø125mm and Ø150mm ducting. The Roof Cowl may also be used to terminate Ø110mm and Ø160mm soil and ventilation pipes where an external pressure test is not required.
The Domus Universal Roof Cowl is easy to install – the adaptor is cut off at the required diameter and attached to the under-tile spigot with solvent weld/PVC glue. The flashing skirt allows fitting into most tiles and slates.
Material Lead substitute flashing skirt around PVC-u terminal, adaptor and flat box hood.
Roof Finish Suitable for most tiled and slated pitched roofs.
Domus Ducting Market leading Domus rigid duct is available in 8 different profiles to suit any application and comes with a full set of fittings to produce a simple or complex system. Offering high levels of air tightness and system efficiency, Domus rigid ducting is also supported by insulation, attenuation and fire-stopping products.
|Product Category||Roof Vents|
|Product Type||Roof Vent|
|Product Group||Plastic Ducting|
|Packaged Weight (Kg)||2|
|Packaged Length (mm)||560|
|Packaged Width (mm)||260|
|Packaged Height (mm)||230|
|Barcode - Type||EAN|
|Manufacturer Product Code||4411|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|