The HR500IP unit is a semi-remote heat exchange unit with 70% heat recovery, designed for mounting in internal walls for installations using ducted extraction and fresh air supply. The HR500IP unit provides air movement via two independent in-line duct fans to suit length and configuration of ducting systems. The unit is ideal for use with with in-line centrifugal type fans and compatible accessories.
Performance of HR500IP: Up to 244 l/s FID capacity (balanced airflow). Ideal for schools, offices, pubs and clubs, etc.
The unit should be set in an inner wall with the grille flange set flush with the inner surface (a steel lintel is provided for additional support of building fabric if required). Automatically produce a 3° slope of the unit away from the inner grille for drainage of any condensate which may form during operation. A 22mm drain is situated between inlet and exhaust spigots and should be connected to a suitable drain/soak away.
|Max ventilation rate||880||244|
Efficiency: The unit should retain up to 70% of the temperature differential of out going air.
Heat exchanger: Should be of a multi plate cross-flow type constructed out of a polymeric plastic with ultra sonic welded joints.
Fan: As a passive device the unit shall require 2No additional remote in-line fans.These should typically be Vent- Axia in-line centrifugal type fan.
Ducting spigots: The unit should provide 315, 250 and 200mm Ø spigots for both duct connections.The unit cannot be handed.
Filter: Should be a washable reticulated foam type coarse filter.
Condensation: The outlet provided should be 22mm Ø located on the lower side of the unit.
Construction: The unit outer case should be a rigid HIPs moulding configured so as to make the unit telescopic. The internal/external grille should be a cream coloured ABS moulding.
Sound Levels: As per specified in-line fan unit
Mains electrical supply: As per specified in-line fan unit
Power Consumption: As per specified in-line fan unit
Fitting Hole Size: 610mm × 381mm
|Product Type||Passive HRV|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.