STANDARD RANGE WALL MODEL - VENTAXIA This model is 7".The proven Standard range wall models are designed to fit flush into most double brick walls using the rigid wall liner supplied with the unit. Provision is made within the liner for conduit entry. When installed, only the ivory fascia is visible on the internal wall face. The external ...
This model is 7".
The proven Standard range wall models are designed to fit flush into most double brick walls using the rigid wall liner supplied with the unit. Provision is made within the liner for conduit entry. When installed, only the ivory fascia is visible on the internal wall face. The external weather louvre fits flush to the outside. A shutter is available as an accessory which can be easily fitted within the unit, see below.
On new building work the installation and wiring of the wall liner can be completed prior to the final installation of the unit and controller. Fully shrouded connectors on the fascia automatically connect the wiring to the motor when fitted to the wall liner.
Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools. The fascia, motor impeller assembly unplugs from the wall sleeve. The external weather louvre is removed into the room for cleaning. All plastic components can be washed.Click for more information about the range
The motor is purpose-designed. Suitable for running at any angle. Quiet running, enclosed, sealed for life ball bearings.
Supply voltage: 220-240V/1/50Hz.
Suitable for operation in ambient temperatures from -40°C to +40°C.
Fitted with Standard Thermal Overload Protection (S.T.O.P.).
Type SD/R. This extract/intake shutter fits inside the Vent-Axia unit and closes against unwanted backdraughts. It can be fitted at the same time as the unit or at a later date if required. Airflow operated for extract use, cord operated lock for intake use.
|Stock Ref. No.||13 15 10A||13 25 10A||13 35 10A||13 45 10A|
|Amps @ 240V||0.16||0.16||0.24||0.36|
|Extract Perf MAX m³/h||340||544||856||1767|
|dB(A) (med) @ 3m||39||35||43||46|
|Shutter Type SD/R||23 17 10||23 27 10||23 37 10||23 47 10|
|RVS Surface||W30 01 10||W30 01 10||W30 01 10||W30 01 10|
|Flush Fitting||W30 01 10||W30 01 10||W30 01 10||W30 01 10|
|+ 40 01 44||+ 40 01 44||+ 40 01 44||+ 40 01 44|
|Time Switch Type TTC||W36 13 10||W36 13 10||W36 13 10||W36 13 10|
|Multi-unit Type MUC||W36 23 10||W36 23 10||W36 23 10||W36 23 10|
|Fixing hole Square||235||311||311||400|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.