Slimline Mesh is a high density polyethylene membrane incorporating 3mm studs which allows the isolation of wet walls above and below ground. Incorporates a tough HDPE mesh lathing welded to the front face to allow the direct application of various plaster finishes or adhesive ‘dabs' and plasterboard. Also suitable for use on floors above ground to be screeded or in conjunction with Kontract 8 below ground.
Note: in basements where the walls are particularly wet (running water) we recommend the use of Kontract 8 on walls and floors.
Slimline Mesh has the following properties:
Slimline Mesh is suitable for use in accordance with BS 8102:1990 to provide Type ‘C' drained protection to structures below ground giving a Grade 3 or 4 dry environment suitable for domestic or commercial use. In basements it is essential that Slimline Mesh is used in conjunction with a suitable sump and pump facility (unless passive drainage is available on one side of the building) and that this is maintained throughout the lifetime of the installation. To control the risk of condensation it is recommended that all basements should be provided with mechanical ventilation to ensure adequate air circulation in accordance with the guidelines in Approved Document F (Building Regulations 2005).
Cavity drain membranes, drainage and accessories for remedial interior isolation of damp aboveground or basement walls and floors and direction of surface water.
|Product Type||Membrane Systems|
|Packaged Length (mm)||1000|
|Packaged Width (mm)||270|
|Packaged Height (mm)||270|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
How far up the wall do you need to the membrane and does it touch the floor boards