KAIR 110MM X 54MM RECTANGULAR TO 100 ROUND FEMALE 90 DEGREE ELBOW BEND
Kair 90 Degree Elbow Bend with round and rectangular spigots. At one end there is a 100mm round female spigot that will accept any male Kair SYS-100 100mm round fitting. The other end is a rectangular female spigot and fits over Kair 110 x 54mm Rectangular Duct Pipe (Part: "DUCVKC249").
If you want to connect to Kair 100mm Round Pipe (Part: "DUCVKC250") we recommend using a 110MM X 54MM RECTANGULAR TO 100MM ROUND (MALE SPIGOT) 90 DEGREE BEND instead (Part: "DUCVKC237")
Perfectly suited for ducting your Bathroom or Kitchen extractor fan, hydroponics, in-line extract Fans, tumble dryer, or cooker hood.
This item can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input ventilation, air conditioning, HVAC, and Heat Recovery systems.
Kair SYS-100 plastic rigid ducting is perfect for DIY and Trade use and provides superior airflow performance and durability versus flexible duct.
Suitable to use in compliance with Part F Building Regulations.
We stock a large range of round to rectangular 90 degree bends. Click here to view the full range of Kair Plenum Adaptors
We also stock a large range of round to rectangular straight adaptors. Click here to view the full range of Kair Straight Adaptors
Looking for a male adaptor? Click here to view the 110MM X 54MM RECTANGULAR TO 100MM ROUND (MALE SPIGOT) 90 DEGREE BEND
Looking for Compatible Ducting?
Compatible with the extensive Kair SYS-100 range of fittings, outlets, and grilles.
|Round System (mm)||100|
|Flat System (mm)||110x54|
|Product Group||Plastic Ducting|
|Product Variety||110mm x 54mm to 100mm (Female)|
|Diameter - Inner (mm)||100|
|Diameter - Outer (mm)||106|
|Socket size (mm)||100|
|Packaged Weight (Kg)||0.087|
|Packaged Length (mm)||75|
|Packaged Width (mm)||115|
|Packaged Height (mm)||141|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
|Barcode - Type||EAN|
|Vent Axia (similar)||436608|
|Polypipe / Domus (similar)||DD030|
|Pressure Loss (Pa) 15 l/s||8.1|
|Pressure Loss (Pa) 30 l/s||33.1|
|Pressure Loss (Pa) 60 l/s||136.4|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|