Featuring an integrated non-return backdraft damper and supplied with screws and cowl-to-wall rubber gasket, this stylish steel wall extractor hood vent outlet has an unobtrusive profile.
A cushioned low noise flap prevents unwanted sounds from being heard from within the property.
This also features a gravity flap to prevent small mammals and birds from accessing the ducting attached to it.
The gravity flap is stylishly covered by the square shape cowl and in doing so, offers more of an aesthetic appearance than most traditioanl plastic grilles.
Stainless steel cowles offer greater weatherproofing, and are not affected by ultra violet rays like some plastics can be.
The grille can be cleaned using any stainless steel cleaner.
Ideal for all tumble dryer vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, home wall vents, heat transfer & ventilation systems, gas & electric dryers, cooker hood extractors, as well as a wide variety of industrial uses.
|Round System (mm)||125|
|Product Type||Wall Vent|
|Spigot size (mm)||120|
|Packaged Weight (Kg)||0.47|
|Packaged Length (mm)||200|
|Packaged Width (mm)||200|
|Packaged Height (mm)||155|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Can this be mounted on the soffit board? i.e. Horizontally.
There is no restriction to fitting this item horizontally in terms of a physical restriction, but due to the design of the vent you may find that the damper flap will remain constantly open due to the effect of gravity.
If you would still like to use a damper to prevent backdraughts in the system you can use either a metal ERK backdraught shutter (Part: "GALERK125") or a plastic backdraught shutter (Part: "DUCVKC353" elsewhere in your duct run.
Please do not hesitate to contact me direct if you have any queries and I will be glad to assist.
Hi, I need a vent cowl for an inlet pipe for stove ventilation. Can the damper component be removed completely?
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|