Featuring an integrated non-return backdraft damper and supplied with screws and cowl-to-wall rubber gasket, this stylish steel wall extractor hood vent outlet has an unobtrusive profile.
A cushioned low noise flap prevents unwanted sounds from being heard from within the property.
This also features a gravity flap to prevent small mammals and birds from accessing the ducting attached to it.
The gravity flap is stylishly covered by the square shape cowl and in doing so, offers more of an aesthetic appearance than most traditioanl plastic grilles.
Stainless steel cowles offer greater weatherproofing, and are not affected by ultra violet rays like some plastics can be.
The grille can be cleaned using any stainless steel cleaner.
Ideal for all tumble dryer vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, home wall vents, heat transfer & ventilation systems, gas & electric dryers, cooker hood extractors, as well as a wide variety of industrial uses.
|Round System (mm)||150|
|Product Type||Wall Vent|
|Spigot size (mm)||145|
|Packaged Weight (Kg)||0.495|
|Packaged Length (mm)||185|
|Packaged Width (mm)||150|
|Packaged Height (mm)||185|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
I want to connect this to a rangemaster cooker hod. It will require a 90 degree bend. not sure if I buy metal or plastic ducting, what I would need and how it connects together. Can you help?
Thank you for your question.
You will have to go from rectangular to round and I will need to know the diameter of the rectangular ducting you have as other items will be needed. Please give me a call on 0208 463 9683
Do you do a fire resistant internal vent suitable to fit behind a log burner - needs to withstand temperatures of up to 300 degrees?
Thank you for your question. Unfortunately we are unable to help you on this occasion as none of our grilles withstand the heat that is being extracted from your wood burner.
Does the flap operate quietly and effectively? Why has the price been reduced?
I'm looking for a stainless steel vent/grille to fit on the end of a Neff cooker Hood which has an extraction rate of 730m3/hr. It has a 150mm dia outlet and will need approx. 1.5m of hose. Will the free area be enough for this extraction rate? I also seem to have a problem with wasps trying to nest about the house and I don't want them in the extraction hose, will this particular model prevent insects with the non return flap or would I be better off with the DUCSS150, although the free area of this is lesser.
Hi, can the cowl and flap be temporarily dismantled to allow the internal radius of the vent to be sealed against the smaller duct? Long story, but I have a big hole in the wall with a small duct, neither of which are easy to fix, so I'm hoping to solve both problems with this large cover, so long as I can seal the outside of the smaller duct against the inner edge of this vents spigot. Thanks
The price in euros including transport to Portugal for s/stl above item if possible w/bird protection mush .I have to install on outside wall from kitchen exhaust /chimney.Thanks
Does this outlet push to fit (if used with rigid plastic ducting) or does it need sealing e.g. with tape?
looking at a product to fit into a 1hr fire break wall to allow the sprinkler water out but prevent air getting back in during normal times. Can you recommend a suitable product. we need 10 to 30
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|