Our commercial aluminium flexible ducting range - also known as Tecflex 400 - is ideal for use in high, medium and low pressure air conditioning and ventilation systems where a quality uninsulated aluminium flexible ducting is required.
Tecflex 400 is manufactured from aluminium & polyester film in a multi-ply format to provide a tough yet highly flexible, puncture resistant, ducting. The fabric is supported by an encapsulated high tensile steel wire helix at 35mm pitch. This construction results in a ‘sag free’ yet ultra flexible duct in which smooth bends of less than 1/2 D radius can be produced. Encapsulation of the wire helix between the inner and outer duct wall provides an exceptionally smooth inner wall resulting in excellent friction loss characteristics and reduced levels of noise generation.
Un-insulated flexible ducting for joints or connections shall be TECFLEX 400. It shall be manufactured from aluminium & polyester film to form a puncture resistant multi-ply laminate supported by an encapsulated high tensile steel wire helix. The duct shall meet the requirements of BS476 parts 6, 7 and 20.
Each 10 metre length of duct is individually cartoned & labelled. This production and packing configuration ensures that wastage through scrap is kept to a minimum and dramatically reduces the chance of damage in transit or on site. Storage space required is also kept to a minimum with a 10 metre length being compressed to 590mm.
Fully extend ducting, then cut to exact length required using a sharp knife and pliers. We recommend that joints be sealed on medium and high pressure applications using Tecseal Sealant. To fix Tecflex 400 to spigots we recommend the Tecfix Banding or our Quick Release Worm Clip system.
We also supply Tecsonic Acoustic Flexible Ducting in three grades to meet virtually any application. Comprehensive literature is available.
|Alternative Product Code||GALSRFG1-500|
|Made to order||No|
|Product Category||Flexible Hoses|
|Round System (mm)||500|
|Product Type||Flexible Aluminium Hose|
|Product Group||Flexible Ducting|
|Diameter - Inner (mm)||500|
|Material||Aluminium & Polyester|
|Packaged Weight (Kg)||5.157|
|Packaged Length (mm)||900|
|Packaged Width (mm)||512|
|Packaged Height (mm)||515|
|Temp Max (°C)||120|
|Temp Min (°C)||-30|
|Economy Delivery||Not Eligible|
|Manufacturer Product Code||160079|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
hi there, I was just enquiring about the strength of this particular product, as opposed to the semi rigid aluminium product you also sell. or possibly link me with the best type of material for the job. our out put of waste a day can often touch 20 tons of saw dust. just so you know what work I have in mind. the current flexi ducting we have in at the moment is wearing away. thank you very much in advance. your faithfully Declan Ramsey.
I would not recommend the flexible aluminium ducting for anything other than ventilation purposes, and it is not as strong as the semi-rigid. I do not think the semi-rigid would be suitable either considering the usage you have described.
I would suggest that you call in and speak to one of our team regarding the specifics of your application to confirm the most suitable product.
However, as a general comment we do have a specialist dust-extraction hose which is more suited to heavy duty applications. However the suitability will depend upon the working temperature, application, and the type of particles being extracted.
This dust extraction hose can be purchased in 1m or 10m lengths and is available in Grey or Clear. Please see http://www.i-sells.co.uk/dust-extraction-clear or http://www.i-sells.co.uk/dust-extraction-grey
Please do not hesitate to give us a call to discuss the above or any other queries you may have on 0208 463 9696
With kind regards,
|Customers who bought this product also purchased|