Galvanised Metal T-piece built with fully pressed top section or a PSU saddle. Pressure drop, see graphs in this Data Sheet.
The product codes ;for these products ;contain two numbers, e.g. GALTCPU-80-63, which refer to the two variable dimensions in the tee piece.
These numbers transate as, firstly, ;the diameter of the straight portion of the pipe, and secondly, the diameter of the 90 degree spigot, ;simply:
GALTCPU - Diameter straight (Ød1) - Diameter 90 degree spigot (Ød3)
Note the diagram, below.
|Made to order||Yes|
|Temp Max (°C)||250|
|Temp Min (°C)||Seal: -30 Continuous / -50 Intermittent|
|Manufacturer Product Code||277529|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|