KAIR LOUVRED GRILLE 125MM ROUND SPIGOT - WHITE
Plastic air outlet / air inlet round grille with fixed louvres.
Kair System 125 round ducting is a very versitile system and it is ideal for long ducting runs for whole house ventilation systems. There are a wide variety of Kair connectors, clips, and tapes available to provide effective connections to the Kair Rigid Round and Rectangular ducting ranges to offer you greater flexibility in completing your install.
Kair System 125 ductwork is perfect suited for ducting your bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or cooker hood. This range can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, air conditioning, positive pressure ventilators, HVAC, and heat recovery systems.
The Kair range of louvred grilles are available in 4 colours:
Versions with 110mm x 54mm rectangular spigots are also available. Click here to view the full range of Kair Plastic Louvred Grilles With Rectangular Spigot.
Kair Louvred Grilles are available with 100mm, 125mm, and 150mm round spigots. Click here to view the full range of Kair Plastic Louvred Grilles With Round Spigot.
Looking for compatible ducting?
|Round System (mm)||125|
|Product Type||Grille - Louvre|
|Product Group||Plastic Ducting|
|Spigot size (mm)||28 x 120 x 120|
|Packaged Weight (Kg)||0.097|
|Packaged Length (mm)||155|
|Packaged Width (mm)||44|
|Packaged Height (mm)||155|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
|Polypipe / Domus (similar)||5904|
|Pressure Loss (Pa) 15 l/s||4.6|
|Pressure Loss (Pa) 30 l/s||18.37|
|Pressure Loss (Pa) 60 l/s||73.41|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
I currently have a Vortice extractor unit fitted to the ceiling above my shower. I want to buy an in-line extractor. Does this spigot fit over the hole where my current extractor is and is it a simple task of connecting this spigot to the in-line extractor via flexible ducting. Thank you
I have a 130mm round flexible aluminium duct coming from a boiler and terminating to an exterior wall. Is this product suitable for that or can you recommend one that is ?
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|