White PVC Flexible 133mm x 3000mm length (3 Metre) Ducting for use with extractor fans, cooker hoods, and tumble dryers. Also available in 15m lengths (Part: "DUCP0440/127/35").
Flexible ducting offers an easy solution for running ducting around obstacles or in tight spaces where using rigid plastic ducting is unsuitable.
Kair flexible PVC ventilation ducting hoses are manufactured in the UK with a light wire spiral reinforcement inside white PVC ducting material.
Our flexible duct lengths come packed compressed for ease of shipment and can be cut on site to desired length.
If your duct run passes through a cold space such as a loft, we would recommend using an insulated ducting hose. Click here to view the full range of Kair Domestic Insulated Ducting
This product is part of the Kair Ventilation System 125 Plastic Round Ducting Range (SYS-125). Kair System 125 Round Ducting provides superior airflow performance when compared with 150mm x 70mm rectangular ducting. It is ideal for long ducting runs for whole house ventilation systems.
There are a wide variety of Kair connectors, clips, and tapes available to provide effective connections to the Kair round and rectangular ducting ranges to offer you greater flexibility in completing your install.
The Kair range of flexible ducting hoses are commonly used for the following applications:
|Round System (mm)||125|
|Product Type||Flexible Hose|
|Diameter - Inner (mm)||127|
|Diameter - Outer (mm)||133|
|Packaged Weight (Kg)||0.312|
|Packaged Length (mm)||90|
|Packaged Width (mm)||137|
|Packaged Height (mm)||140|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Hi, it the a fitting that attaches 4" hose to 6" pipe
If you are looking to attach 4" hose to 6" rigid pipe you would need the following items in addition to the pipe and hose:
1 x 150mm Male Connector
1x 150mm - 100mm reducer
1 x 100mm Female Threaded Hose connector
By putting those three items together you will end up with a part that allows 4'' flexible hose to connect to our 150mm rigid pipe.
I notice that you posted this question on a 5" flexible hose so the above set up would not work with 5".
Please give ma call if you have any questions on 0208 463 9670
how do i add this to my pending order no 293337 ?
I will attempt to contact you by the telephone number provided shortly.
If I have not managed to get through, please call our team on 0208 463 9696 and quote your order number, and they will be able to add to your existing order as long as it has not left the warehouse already - best to give us a call before 12 noon to ensure it can be added.
Hello Planning to fit to my tumble drier. With the fitting I have to turn it in anti clockwise. Wondering which direction the thread on theof the support wire goes. Facing the vent in my drier I have to turn the insert of the wire and the hose anti clockwise.
I have replaced a kitchen extractor. I need to connect a male 120mm diameter from the hood outlet to an existing male 110mm diameter in the exterior wall outlet. Would this be suitable & what clips would I need?
I am fitting a kitchen extractor. The hose connects to the male end of a reducer that has a diameter of 120 mm. The other end screws into a threaded hose connector, the OD of the threaded end of this is 143 mm. Will this hose be suitable? Thanks.
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|