Rectangular Flexible Bend - Length approx 500mm - Female Spigots will fit over Kair 150mm x 70mm Ducting Pipe (Search for "DUCVKC604"). Kair Flexible 150mm x 70mm ducting (Search for "DUCR3M/150/70") will fit over either end of the bend. Support using Flat Channel Clips (Search for "DUCVKC610").
Can be used with either flexible hose or rigid duct to bypass obstacles in the way of your ductwork without the need for multiple rigid bends. Kair System 125 (SYS-125) Rectangular Ducting is designed for short duct runs and it can be easily concealed due to its low profile. It is perfect for installations requiring low extraction rates such as bathrooms, toilets, and utility rooms.
Flexible bends offer you extra flexibility in running your duct run. A flexible bend can be used with either flexible hose or rigid duct to easily bypass obstacles in the way of your ductwork installation without the need for multiple rigid bends, especially where installation space or access is limited. It is easy to install, just push-fit together & seal if required using a method of your choice (Popular options include silicone sealant, solvent cement, or tape).
Kair rectangular ducting offer compact dimensions and is suitable for flush fitting against ceilings and walls, which makes it a perfect choice for when space is restricted or when duct has to be run in visible areas. Common applications for this pipe include tumble dryer venting, ducting for bathroom or kitchen extractor fans, hydroponics ventilation systems, in-line extraction systems, or cooker hood ducting. Using a number of pipes, bends, and connectors you can create long ductwork runs for whole-house ventilation systems, such as air conditioning duct runs, heat recovery ducting systems, or positive pressure/input ventilation.
Looking for compatible products?
Compatible with the extensive Kair SYS-125 range of fittings, outlets, and grilles.
|Flat System (mm)||150x70|
|Product Group||Plastic Ducting|
|Packaged Weight (Kg)||0.207|
|Packaged Length (mm)||160|
|Packaged Width (mm)||162|
|Packaged Height (mm)||73|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|