SYSTEM 150 RECTANGULAR - AIRBRICK WITH DAMPER Fits inside DUCVKC651 SYSTEM 150 RECTANGULAR - 180MM X 90MM FLAT CHANNEL 1 MTR Depth of spigot: 60mm
SYSTEM 150 RECTANGULAR - AIRBRICK WITH DAMPER
Depth of spigot: 60mm
|Flat System (mm)||150|
|Socket size (mm)||59 x 178 x 90|
|Packaged Weight (Kg)||0.139|
|Packaged Length (mm)||70|
|Packaged Width (mm)||220|
|Packaged Height (mm)||123|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
|Pressure Loss (Pa) 15 l/s||17.33|
|Pressure Loss (Pa) 30 l/s||25.49|
|Pressure Loss (Pa) 60 l/s||72.67|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Is a damper the same as a back-draught mechanism to avoid wind & rain blowing back into the kitchen? Thanks, GW
Thank you for your question. Yes the damper and back draught shutter do the same job they will stop air blowing back in.
How do I fix it to the external wall? If I use screws, will they be exposed?
Hi, Is it possible to fix flexible ducting to this airbrick or does it need an adaptor?
The pictures show this mounted vertically - is it OK to mount horizontally, facing down, in an eave ? Thanks
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|