KAIR SYSTEM 204 RECTANGULAR DUCTING FLEXIBLE BEND 204MM X 60MM
Rectangular Flexible Bend - Length approx 500mm - Female Spigots will fit over Kair 204mm x 60mm Ducting Pipe (Search for "DUCVKC5604"). Kair Flexible 204mm x 60mm ducting (Search for "DUCR3M/206/60") will fit over the either ends of the bend. Support using Flat Channel Clips (Search for "DUCVKC5610").
Can be used with either flexible hose or rigid duct to bypass obstacles in the way of your ductwork without the need for multiple rigid bends. Kair System 204 (SYS-204) Rectangular Ducting is designed for short duct runs and it can be easily concealed due to its low profile. It is perfect for installations requiring low extraction rates such as bathrooms, toilets, and utility rooms.
Flexible bends offer you extra flexibility in running your duct run. A flexible bend can be used with either flexible hose or rigid duct to easily bypass obstacles in the way of your ductwork installation without the need for multiple rigid bends, especially where installation space or access is limited. It is easy to install, just push-fit together & seal if required using a method of your choice (Popular options include silicone sealant,solvent cement, or tape).
Kair rectangular ducting offer compact dimensions and is suitable for flush fitting against ceilings and walls, which makes it a perfect choice for when space is restricted or when duct has to be run in visible areas. Common applications for this pipe include tumble dryer venting, ducting for bathroom or kitchen extractor fans, hydroponics ventilation systems, in-line extraction systems, or cooker hood ducting. Using a number of pipes, bends, and connectors you can create a long ductwork run for whole house ventilation systems, such as air conditioning duct runs, heat recovery ducting systems, or positive pressure / input ventilation.
Looking for compatible products?
Compatible with the extensive Kair SYS-204 range of fittings, outlets, and grilles.
|Flat System (mm)||204|
|Socket size (mm)||205|
|Packaged Weight (Kg)||0.274|
|Packaged Length (mm)||165|
|Packaged Width (mm)||219|
|Packaged Height (mm)||65|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Will the system 204 flexible connector join directly to the airbrick and /or with the rectangular-to-round adaptor, or do they need a piece of flat channel to make the joins? Thanks for your help.
hi, I am using an existing Osma 110mm redundant soil pipe roof vent for our new bathroom extractor fan. There's not much room and the roofing joist aren't deep enough to accommodate a 110mm pipe. And the soil pipe is at 45 degrees take off. I was thinking along the lines of attaching a round to flat connector and then converting the other end flat to round for the extractor fan which will be only 12 inches from the soil pipe vent. Can you point me in the right direction in your product line for any suggestions. If you call me please make it after 3 pm on the 15 Mar. Thank you. Peter
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|