The HR100R is ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.
The HR100R features top access and is ideal for loft installations.
The unit comes fitted with a single 2-speed motor and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control.
An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity.
Up to 66m³/h FID capacity (extract airflow). As the unit provides superior control of condensation and odours best use would be in bathrooms or small internal rooms.
The HR100R is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using tape or worm drive clips.
A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.
Click for more information about the range
Performance: | m³/h | l/s |
Max ventilation rate | 66 | 18.3 |
N° speed settings | 2 |
Efficiency: The unit should retain up to 70% of the temperature differential of outgoing air.
Heat exchanger: should be of a multi-plate cross-flow type constructed out of a polymeric plastic with ultrasonically welded joints.
Motor: Should be a 2 speed 240V 50Hz A/C with sleeve bearings, greased for life. It shall operate up to an ambient temperature of 40°C and be fitted with a one-shot thermal overload protective device.
Fan: The two polymeric fan wheels should be a centrifugal forward curve type on a common shaft.
Controls: The unit should be operated via a remote Trickle Boost switch or a humidistat. A light switch can be used providing a 'timed out' device is employed.
Ducting spigots: The unit should provide 100mm Ø x 50mm spigots for all duct connections. The unit cannot be handed. (Can be converted to flat ducting).
Filter: not fitted.
Condensation: the outlet provided should be 22mm Ø located on the underside of the unit.
Construction: the unit outer case is manufactured from white powder-coated sheet metal.
Sound Levels: | dB(A) @ 3m |
Minimum | 20.0 |
Maximum | 30.0 |
Mains electrical supply: 230VAC 50Hz.
Complies to the following approvals/directives: CE.
Motor Speed | 1 | 2 |
---|---|---|
Volume l/s (FID) | 13 | 18 |
Weight: 5.6kg
Power Consumption | |
---|---|
Minimum | 19W |
Maximum | 29W |
Replaces Product Code | VENHR100R |
Heat Recovery Efficiency (Up to - %) | 70 |
Product Category | Heat Recovery Unit |
Round System (mm) | 100 |
Product Type | Heat Recovery - Single Room |
Product Group | Ventilation Fan |
Product Variety | Single room Top access |
Spigot size (mm) | 98 |
Socket size (mm) | 100 |
Decibel Rating (dB) - Low | 20 |
Decibel Rating (dB) - Max | 30 |
Weight (Kg) | 5.6 |
Packaged Weight (Kg) | 4.2 |
Packaged Length (mm) | 420 |
Packaged Width (mm) | 280 |
Packaged Height (mm) | 210 |
Pressure Loss (Pa) 15 l/s | 13.6 |
Pressure Loss (Pa) 60 l/s | 18.3 |
Airflow Performance (m³/h) - Low | 48.96 |
Airflow Performance (m³/h) - High | 65.88 |
Maximum suggested long duct run (Mtr) | 3 |
Quick Search: | QS16936 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
what is the correct pipe diametres/sizes needed.? many thanks.
Hello Paddy
Thank you for your question. The HR100R is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using tape or worm drive clips.
Hi there. Would this be suitable for a basement.. Thanks.
HI im phil from the technical department. i will give you a call today to discuss your project and plans in hand
Hello Sir/Madam, I am proposing a kitchen and toilet standalone pod in an historic church. I have proposed a vent/duct system that connects all other vents and can run through under historic wall. Would it be possible for you to advise if your centralised extract ventilation unit product will be able to achieve the proposed extract system. Please find the drawings attached for reference. I will look forward for your response. Thanks, Kind regards, Shuchi
Hello Shuchi
|
Customers who bought this product also purchased |