We provide a number of standard, practical, boxed ducting kits in both rigid and flexible variations in short or longer kits. Each kit contains the required parts to provide ducting to a cooker hood, tumble dryer or extractor fan.
This kit contains a white wall outlet.
Not quite the right kit for you? Please contact us - We can make up bespoke kits with the items needed for any particular installation.
|Round System (mm)||150|
|Product Type||Ducting Kit|
|Packaged Weight (Kg)||0.45|
|Packaged Length (mm)||210|
|Packaged Width (mm)||210|
|Packaged Height (mm)||205|
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Cooker hood model 1Q 2HP straight glass hood. Needs to duct out wall , which is 1 & half metres to left of hood . The hood is of a low volume extraction . Is there a way to change the motor to a high volume type ? If not do you have a hood of high volume ? The cost has to be lowest you have , due to very low budget
Thank you for your question
You can incorporate an in line fan. These come in 3 sizes 4" 5" 6" depending on what size ducting you are using. They also come as standard models or timer models. If purchasing the standard model then a controller can be added.
i purchased Siemens LC98KC652B Angled cooker hood and I need ducting kit what do I need to purchase
Hi, do you do this kit with a brown gravity vent please?
Do you sell this kit with a brown gravity vent please? If so is their a link to order it online? Thanks
Yes the datasheet does state that there are a range ofcolours for the external vent.Please enter QS4451 in the quick search bar.
If ordering enter preferred colour in the specialinstructions section.
I hope this helpsRegards
Can this product be used with 150mm portable aircon hoses? Also, is there a lid that I could screw in the indoor part of this product while the hose from an aircon machine is not connected? Thank you
DWW077A50B, Bosch Serie 4 70cm Chimney Hood, STAINLESS STEEL Is this the correct kit for this cooker hood, and is all required included?
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|