|BULK SAVINGS Inc. Vat|
|2 +||11 +|
Straight plastic duct connector fits inside rigid or flexible ducting
White plastic straight ducting connector. Male spigot will fit inside Kair 150mm rigid pipe (Part: "DUCVKC670") or 152mm Flexible Hose (Part: "DUCP0092/152/35") and can be used to join multiple lengths of pipe together to form a long duct run.
Kair System 150 (SYS-150) round ducting provides superior airflow performance when compared with smaller diameter systems. It is perfect for long duct runs for high power extraction systems and whole house ventilation purposes where pressure drop needs to be minimised.
Kair Round Ducting Connectors are available to suit the following duct sizes:
We also stock a range of 125mm fast-seal duct couplings, which can help speed up your installation time by reducing the need for taping or sealing ducting together.
|Round System (mm)||150|
|Spigot size (mm)||149|
|Packaged Weight (Kg)||0.074|
|Packaged Length (mm)||65|
|Packaged Width (mm)||155|
|Packaged Height (mm)||155|
|Temp Max (°C)||60|
|Temp Min (°C)||-15|
|Vent Axia (similar)||370299|
|Polypipe / Domus (similar)||693|
|Pressure Loss (Pa) 15 l/s||0.11|
|Pressure Loss (Pa) 30 l/s||0.2|
|Pressure Loss (Pa) 60 l/s||1.1|
Last Orders for delivery before Christmas
Please call us on 020 8463 9696 or place orders online by midday Thursday 20th December 2018.
Will be limited only to online queries, please allow up to 48 hours for a response.
All orders are subject to availability. Please call us on 020 8463 9696 to check availability or likely despatch date.
View full delivery dates here
SIDCUP SHOWROOM STORE (Get Directions)
Closes: 4:30pm Thirsday 20th December.
Opens: 8:00am Wednesday 2nd January 2019
|Shipping Method||Under £100*||Over £100*|
4 to 7 Days (Orders under £25 inc VAT)
4 to 7 Days (Orders over £25 inc VAT)
2 to 4 Days (Interlink or TNT)
Next Working Day Delivery+
* Usually £200+vat
+ Order before noon for Next Working Day Delivery for items in stock
Excludes Highlands, Islands, and Certain Postcodes.
Please Note: Ducting tubes over 200mm in diameter and 3 metres in length may incur additional shipping charges.
See the full delivery information here: Full delivery information
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
I have a new Mercury Cooker Hood and I have purchased a 6 inch (the cooker hood) to 4 inch (flexible hose) adaptor but the hood when switched on has two flaps that open outwards. There is not enough clearance on the adaptor for the flaps to fully open. If I bought two 150mm Round Straight Connectors would these link together giving me 100mm clearance for the flaps to open and to which the 6 inch to 4 inch reducer would also fit
|Customers who bought this product also purchased|
|Ducting System||Actual dimensions (mm)||Space requirements (mm)||Airflow mm²|
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour
|System 100 - Round||100||106||7,854|
|System 100 - Rectangular||110 x 54||116 x 60||5,940|
For medium extraction rates or if available depth is limited up to 500m³/hour
|System 125 - Round||125||131||12,272|
|System 125 - Rectangular||150 x 70||156 x 76||10,500|
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above
|Megaduct 220 - Rectangular||220 x 90||227 x 97||17,968|
|System 204 - Rectangular||204 x 60||210 x 66||12,240|
|System 150 - Round||150||156||17,671|
|System 150 - Rectangular||180 x 90||186 x 96||16,200|
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed:
|System 300 - Rectangular||308 x 29||314 x 35||8,932|
|System 225 - Rectangular||234 x 29||240 x 35||6,786|
| System 100 |
| System 125|
| System 150|
|System 204||System 225|
|System 220||System 300|
|Actual Dimensions (mm) Space Requirements (mm)|