The Airflow iCON 15 (72683501 - Replaces 72591501) extractor fan is an ideal solution for increasing levels of ventilation in toilets, en-suites, shower rooms and bathrooms, with a flow rate up to 21 l/sec (76 m3/hr).
The unit can be recessed into the wall or ceiling and it is stylish and unobtrusive, even in the smallest space. The quiet, powerful axial fan has been designed with simplicity in mind. A quick, core drilled hole enables immediate fixing of iCON 15. The twist on/off cover requires only a single side entry fixing screw. Cantilever fixing lugs enable recessed installation on uneven surfaces.
Main Features
Applications
Toilet, En-suite, Bathrooms, Utility rooms
CHOOSE YOUR FAN
The basic iCON 15 fan (72683501) is supplied for remote switching, with a white finish.
CHOOSE YOUR COLOUR
To co-ordinate with your decor and fixtures, you can choose a style cover to replace the basic white. Colours available are Anthracite, Chrome, Sandstone or Silver.
Note: Coloured covers are for recessed fan mounting only.
please use the dropdown boxes to choose your colour.
CHOOSE YOUR CONTROL MODULE
You can customise the control method for your fan by adding one of the following modules:
Basic-Fan operates by remote switch (not supplied). No module required
PCM-Pull Cord-On/Off by integral pull cord
TM-Timer-adjustable 1 to 45 minutes. Remote, light or door switch operation
HTM-Humidity-adjustable 40% to 90% RH, adjustable timer and pull cord boost
PRTM-Infrared Timer- Passive Infrared activation with adjustable run-on timer
PRHTM-Infrared Humidity Timer-Passive infrared activation with adjustable humidity/adjustable timer
Please note: This listing replaces 72591501 and 72591501B
Alternative Product Code | 72683501 |
Replaces Product Code | 72591501 |
Product Category | Extractor Fan |
Round System (mm) | 100 |
Product Type | Axial Fan |
Product Group | Ventilation Fan |
Product Variety | Standard |
Length (mm) | 40 |
Width (mm) | 197 |
Height (mm) | 197 |
Spigot size (mm) | 100 |
Voltage (V) | 230-240v |
IP Rating | IPX4 |
Power Max (Watts) | 9.2 |
Decibel Rating (dB) - Max | 35 |
Colour | White |
Weight (Kg) | 0.74 |
Packaged Weight (Kg) | 1.038 |
Packaged Length (mm) | 130 |
Packaged Width (mm) | 200 |
Packaged Height (mm) | 210 |
Temp Max (°C) | 40 |
Barcode | 5019009307633 |
Manufacturer Product Code | 72591501 |
Vent Axia (similar) | ECLIPSE100X |
Greenwood Airvac (similar) | CV2GIP |
Airflow Performance (l/s) - High | 19 |
Airflow Performance (m³/h) - High | 68 |
Maximum suggested long duct run (Mtr) | 4 |
SAP Appendix Q applicable | YES |
Warranty (Years) | 3 |
Quick Search: | QS3527 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
I have a new ensuite with an icon airflow fitted. the extractor is leaving excessive condensation possibly because the duct run to the outside is quite long. Can you tell me which product I should use for this type of application
Hello John
Thank you for your question. Could you please advise me how long your duct run is. My direct line is 0208 463 9683 and my e-mail address is anita.bowers@I-sells.co.uk
Does this fan come with a timer or do we need to buy one seperate
Hello Jennifer
Thank you for your question. This item is just the fan and there are modules that come separately to fit into the fan. The timer module you require is product code QS3560.
Can I use about 20ft of flexible ducting with this model (no bends or angles). Roof exit Also if a timer is fitted is it all linked into the bathroom light bathroom light or is a separate switch required?
Hello John,
The manufacturer's advise would be to only use up to four metres of rigid pipe with the unit. I would recomend looking at a higher-spec in-line fan for the application described. The range can be viewed here
Kind regards,
Michael
Hello, When I try to change the cover of this fan, the blades sometimes get stuck either half-open or half closed which means I can't change the cover. How do I fix this?
Hello,
Please follow this step by step process which should resolve this issue for you.
|
|
Customers who bought this product also purchased |