Please note: As of January 2017 the manufacturer has changed the specification of this unit. The unit now has three-speed settings. i-sells.co.uk always supplies brand new stock ordered directly from the manufacturer so you will always receive the latest model
This powerful in-duct mounted mixed flow fan has been designed to produce higher working pressures for applications that require high air flows, with low relative noise.
Can be used with either rigid or flexible ducting. Perfect for bathrooms, kitchens, indoor grow room or other rooms where that need a constant extraction of air.
The Manrose MF150S specially designed fan assembly allows easy installation and maintenance. The inline duct is easily installed or removed for maintenance from rigid or flexible ducting.
Specification: High
Air Extraction: 500m3/hr
Air Extraction L/s: 138 L/s
Noise: 35dB(A)
Watts: 48W
Specification: Low
Air Extraction: 400m3/hr
Air Extraction L/s: 111 L/s
Noise: 31dB(A)
Watts: 42W
Model | A | B | C | D | E | F | G | Spigot Int Diameter |
MF150S | 150 | 217 | 307 | 192 | 120 | 226 | 30 | 145 |
Optional Control options:
Alternative fans:
Timer | No |
Product Category | In-Line Fans |
Round System (mm) | 150 |
Product Type | Mixed Flow In-Line Fan |
Product Group | Ventilation Fan |
Length (mm) | 318 |
Width (mm) | 270 |
Height (mm) | 215 |
Spigot size (mm) | 145 |
IP Rating | IPX4 |
Power Min (Watts) | 42 |
Power Max (Watts) | 48 |
Decibel Rating (dB) - Low | 31 |
Decibel Rating (dB) - Max | 35 |
Colour | Black |
Weight (Kg) | 2.783 |
Packaged Weight (Kg) | 2.783 |
Packaged Length (mm) | 318 |
Packaged Width (mm) | 270 |
Packaged Height (mm) | 215 |
Temp Max (°C) | 40 |
Next Day Delivery | Not Eligible |
Barcode | 5020953554356 |
Barcode - Type | GTIN |
Manufacturer Product Code | MF150S |
Vent Axia (similar) | ACM150 |
Manrose (similar) | MF150S |
Airflow Performance (l/s) - Low | 111 |
Airflow Performance (l/s) - Med | 127 |
Airflow Performance (l/s) - High | 138 |
Airflow Performance (m³/h) - Low | 400 |
Airflow Performance (m³/h) - Med | 460 |
Airflow Performance (m³/h) - High | 500 |
Quick Search: | QS9657 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Could I fit this into 4" ducting and if so what are the effects? Also could I fit this at the bottom of the ducting above the grill in the canopy or does it have to be above in the ducting. Finally is it best to install this model horizontally or vertically
Hi, can this in line motor be used with a cooker hood? It would sit between the cooker hood and a duct pipe running up and out of a chimney...
Although this fan is an in-line unit designed for ducting the impellers are not suited for extracting from a cooker hood as they have too much surface area which can attract fats and salt deposits on the blades,
Hi, Which speed controller is needed to obtain the 3 Speeds for the Manrose MF150S inline duct fan. The info is not to clear/obvious in regard to the controllers. Thanks.
Hello Stewart
I was looking at the Manrose MF125S 3 speed to fit for a inline remote cooker hood extraction. I noted in your Q/A replies for this model the EBM PAPST was recommended due to the configuration on the fan blades. Your advise was to put in QS38972 into the quick search.No results came up on the search ? can you advise ?
Hello Alan
Hi I purchased this product from you 02/09/2017, order ref 314217. The product has now stopped working. I believe it is covered by a 3 year warranty. Is this correct and if so, how would I go about getting a replacement unit please ? Kind regards Richard
Hello Richard
Hi Reading the description, it states... "...Perfect for bathrooms, kitchens, indoor grow room or other rooms where that need a constant extraction of air..." Does this mean the fan is constantly extracting air? If so, does this mean it has an automatic trickle extraction and then a higher extraction when activated? Thanks Nick
Good morning. The MF100S is a mixed flow inline fan. It isn't designed to run constantly. You can wire it up to a Humidity sensor/Timer (MAN1361) which can help to control the humidity.
Customers who bought this product also purchased |