Kair 90 degree elbow adaptor with round and rectangular spigots. At one end there is a fixed 150mm Round Male Spigot that fits inside Kair 150mm round duct pipe (Part: "DUCVKC670") or flexible hose (Part: "DUCP0092/152/35").
The other end is a female socket and fits over Kair 220mm x 90mm Rectangular Duct Pipe (Part: "DUCVKC5704"). PVC Flexible Hose 220mm x 90mm (Part: "DUCR3M/220/90") will fit over the spigot.
Perfectly suited for ducting your Bathroom or Kitchen extractor fan, hydroponics, in-line extract Fans, tumble dryer, or a cooker hood. This bend can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input ventilation, air conditioning, HVAC, and heat recovery systems.
Kair System 220 ducting has comparable airflow performance to 150mm round duct. It is best utilised as a part of a ducting system for high powered cooker hood extractors and whole-house ventilation systems.
Kair 150mm Round duct is ideal for high-powered cooker hoods and extract systems, and long ducting runs for whole-house ventilation systems.
Click here to view the full range of Kair 220mm x 90mm Rectangular Ducting Products
Click here to view the full range of Kair 125mm Round / 150mm x 70mm Rectangular Ducting Products.
Product Category | Adaptors |
Round System (mm) | 150 |
Flat System (mm) | 220x90 |
Product Type | Adaptor |
Product Group | Plastic Ducting |
Product Variety | 220mm x 90mm to 150mm |
Length (mm) | 237 |
Width (mm) | 225 |
Height (mm) | 95 |
Diameter - Inner (mm) | 145 |
Diameter - Outer (mm) | 150 |
Spigot size (mm) | 220x90 |
Weight (Kg) | 0.376 |
Packaged Weight (Kg) | 0.354 |
Packaged Length (mm) | 250 |
Packaged Width (mm) | 230 |
Packaged Height (mm) | 95 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272546670 |
Pressure Loss (Pa) 60 l/s | 10.6 |
Pressure Loss (Pa) 120 l/s | 41.8 |
Pressure Loss (Pa) 180 l/s | 94.1 |
Quick Search: | QS18944 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Please could you let me have all the measurements of full detpth and length. Thank you
Hi,
Need to attach 220 system flat ducting to a Neff extractor with a 150mm round outlet. Please can you advise which components i would need for this.
Hello Mark
Thank you for your question. To join the 220x90 elbow bend to your 150mm spigot on your cooker you will require a 150mm female sleeve or a piece of 150mm pipe as both connections are male and a female connector is required. If you need any further assistance please do not hesitate to contact me on 0208 463 9683
Kind Regards
Anita
Hi, my cooker hood has a 150 round exhaust and I would like to connect it to a flat 220 x 90 ducting system, is this the correct item to allow me to do that?
Hello Paras
Hi is this product compatible with the Kair Semi-Rigid Aluminium Hose 152mm Dia - 3 Metre Length Hose for Fans, Cooker Hoods and Ventilation?
Hello Elizabeth
Hi, can I connect QS18944 to a semi-rigid 150mm aluminium hose QS25 ?
Good morning.
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |