This vertical 45-degree elbow bend can be used to run your ductwork around obstacles, along walls and into ceilings and offers superior performance and durability over flexible alternatives.
One end is a female socket. This end will fit over Kair System 225 (234mm x 29mm) flat ducting pipe (Part: "DUCVKC706").
The other end is a male spigot and will fit inside System 225 sockets such as bends, or t-pieces. A System 225 Connector (Part: "DUCVKC700") will be required to connect to System 225 Flat Pipe (Part: "DUCVKC706").
Kair System 225 (SYS-225) Rectangular Ducting is a perfect solution for installations where space is restricted. It is ideal for installations into ceiling voids, within walls, or under floors where compact dimensions are of greater importance than airflow rates.
Compatible with the extensive Kair System 225 range of pipes, fittings, outlets, and grilles.
Click here to view the full range of Kair 234mm x 29mm Rectangular (System 225) Ducting Products.
The Kair range of plastic ducting is commonly used for the following applications:
Product Category | Bends |
Flat System (mm) | 234x29 |
Product Type | Bend |
Product Group | Plastic Ducting |
Product Variety | 45 Degree Vertical |
Length (mm) | 112 |
Width (mm) | 238 |
Height (mm) | 70 |
Spigot size (mm) | 233 |
Socket size (mm) | 233 |
Colour | White |
Material | Polystyrene |
Weight (Kg) | 0.149 |
Packaged Weight (Kg) | 0.146 |
Packaged Length (mm) | 240 |
Packaged Width (mm) | 120 |
Packaged Height (mm) | 35 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5060272543402 |
Vent Axia (similar) | 441656 |
Xpelair (similar) | 91111AA |
Manrose (similar) | 1670 |
Polypipe / Domus (similar) | 2011 |
Pressure Loss (Pa) 15 l/s | 6.1 |
Pressure Loss (Pa) 30 l/s | 21.12 |
Pressure Loss (Pa) 60 l/s | 73.12 |
Quick Search: | QS416 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |