RYTABC6 – Rytons Cowl 9×6
Surface-mounted cover for 9″ x 6″ openings, air bricks, grilles and vents.
Size: 255mm L x 154mm H x 74mm D.
Free Area: 16000mm² (160cm²) per unit.
Colours:
Installation:
Product Category | Grilles |
Product Type | Grille - Cowl |
Product Group | Plastic Ducting |
Product Variety | 9x6 |
Colour | Terracotta |
Packaged Weight (Kg) | 0.11 |
Packaged Length (mm) | 255 |
Packaged Width (mm) | 80 |
Packaged Height (mm) | 155 |
Quick Search: | QS9787 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
does this prevent against flood?
Hello Zoe
Thank you for your question. This item is not designed for your application. There is a product which is on our website which may help the product code for this item is QS9850. If I can help any further please do not hesitate to contact me on 0208 463 9683
Kind Regards
Anita
How does it fit over air brick ? sealant or rawplugs
Hi John, You can use either:
Have two 220x150mm air bricks on the gable end above the garage roof and water ingress from rain storms is an issue.Not sure which of 9x9 or 9x6 cowls is most suitable. Regards Neil
Hello Neil
Hi, I need covers for 9 x 3 inch air bricks , when the north wind blows we really notice it ! Please can you advise what size covers I should order , thanks
Hello Christine
Hiya - I have an airbrick size 9"x6" at the front of the house which gets the worst of the weather and traffic noise - what size of cowl would you recommend. Thanks
Hello Lesley
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |