SYSTEM 100 ROUND TO ROUND WALL PLATE WITH DAMPER
Alternative Product Code | DUCVKC260 |
Made to order | No |
Replaces Product Code | DUCVKC260 |
Product Category | Wall Plates |
Round System (mm) | 100 |
Flat System (mm) | 110x54 |
Product Type | Damper |
Product Group | Plastic Ducting |
Length (mm) | 156 |
Width (mm) | 156 |
Height (mm) | 65 |
Spigot size (mm) | 99 |
Colour | White |
Colour - Internal | White |
Colour - External | White |
Weight (Kg) | 0.071 |
Packaged Weight (Kg) | 0.076 |
Packaged Length (mm) | 150 |
Packaged Width (mm) | 65 |
Packaged Height (mm) | 150 |
Temp Max (°C) | 60 |
Temp Min (°C) | -15 |
Barcode | 5014662004592 |
Barcode - Type | EAN |
Manufacturer Product Code | 495 |
Polypipe / Domus (similar) | 495 |
Pressure Loss (Pa) 15 l/s | 25 |
Pressure Loss (Pa) 30 l/s | 44.9 |
Pressure Loss (Pa) 60 l/s | 101.6 |
Quick Search: | QS38941 |
Your question will be sent to a member of our team. We'll email you the answer and post it on this page. If your question is about an order you already placed, please use our Contact Form to reach the customer service team.
Im looking for a vent kit for my twice zircon unit now the summer is comming, how wide is the plate? it needs to be 5 inches so it can fit into the slot at the rear of the unit.
Hello Tony
Thank you for your question. The plate size is 6". We do a spigot plate which the plate size is 5" but the spigot is only 75mm if you would like to have a look a the product the code is QS4216.
If I can help further please give me a call on 0208 463 9683
Kind Regards
Anita
Is this item spring loaded so it remains shut until the fan is switched on. I am trying to cut down draughts on windy days.
Hello Paul,
The product utilises a gravity flap design; The flap will stay shut until air flows through the duct, pushing the flap open. When there is insufficient air pressure to keep the flap open, the flap will close naturally through gravity.
If you have any further questions please do not hesitate to contact us.
Kind regards,
Michael
Customers who bought this product also purchased |
Ducting System | Actual dimensions (mm) | Space requirements (mm) | Airflow mm² |
For 4" (100mm) extractor fans or for low power cooker hoods up to 250m³/hour | |||
---|---|---|---|
System 100 - Round | 100 | 106 | 7,854 |
System 100 - Rectangular | 110 x 54 | 116 x 60 | 5,940 |
For medium extraction rates or if available depth is limited up to 500m³/hour | |||
System 125 - Round | 125 | 131 | 12,272 |
System 125 - Rectangular | 150 x 70 | 156 x 76 | 10,500 |
For 6" (150mm) extractor fans or for high power cooker hoods up to 500m³/hour & above | |||
Megaduct 220 - Rectangular | 220 x 90 | 227 x 97 | 17,968 |
System 204 - Rectangular | 204 x 60 | 210 x 66 | 12,240 |
System 150 - Round | 150 | 156 | 17,671 |
System 150 - Rectangular | 180 x 90 | 186 x 96 | 16,200 |
For a shallow space, such as ceiling voids or under floor, where high extraction rates are not needed: | |||
System 300 - Rectangular | 308 x 29 | 314 x 35 | 8,932 |
System 225 - Rectangular | 234 x 29 | 240 x 35 | 6,786 |
System 100 Round/Rectangle | System 125 Round/Rectangle | System 150 Round/Rectangle | System 204 | System 225 |
System 220 | System 300 | |||
Actual Dimensions (mm) Space Requirements (mm) |